2016
Authors
Novais, S; Nascimento, M; Grande, L; Domingues, MF; Antunes, P; Alberto, N; Leitao, C; Oliveira, R; Koch, S; Kim, GT; Passerini, S; Pinto, J;
Publication
SENSORS
Abstract
The integration of fiber Bragg grating (FBG) sensors in lithium-ion cells for in-situ and in-operando temperature monitoring is presented herein. The measuring of internal and external temperature variations was performed through four FBG sensors during galvanostatic cycling at C-rates ranging from 1C to 8C. The FBG sensors were placed both outside and inside the cell, located in the center of the electrochemically active area and at the tab-electrode connection. The internal sensors recorded temperature variations of 4.0 +/- 0.1 degrees C at 5C and 4.7 +/- 0.1 degrees C at 8C at the center of the active area, and 3.9 +/- 0.1 degrees C at 5C and 4.0 +/- 0.1 degrees C at 8C at the tab-electrode connection, respectively. This study is intended to contribute to detection of a temperature gradient in real time inside a cell, which can determine possible damage in the battery performance when it operates under normal and abnormal operating conditions, as well as to demonstrate the technical feasibility of the integration of in-operando microsensors inside Li-ion cells.
2015
Authors
Viveiros, D; Ferreira, J; Silva, SO; Ribeiro, J; Flores, D; Santos, JL; Frazao, O; Baptista, JM;
Publication
PHOTONIC SENSORS
Abstract
A sensing system in the near infrared region has been developed for ammonia sensing based on the wavelength modulation spectroscopy (WMS) principle. The WMS is a rather sensitive technique for detecting atomic/molecular species, presenting the advantage that it can be used in the near-infrared region by using the optical telecommunications technology. In this technique, the laser wavelength and intensity were modulated by applying a sine wave signal through the injection current, which allowed the shift of the detection bandwidth to higher frequencies where laser intensity noise was typically lower. Two multi-pass cells based on free space light propagation with 160 cm and 16 cm of optical path length were used, allowing the redundancy operation and technology validation. This system used a diode laser with an emission wavelength at 1512.21 nm, where NH3 has a strong absorption line. The control of the NH3 gas sensing system, as well as acquisition, processing and data presentation was performed.
2015
Authors
Martins, R; Caldas, P; Teixeira, B; Azevedo, J; Monteiro, J; Belo, JH; Araujo, JP; Santos, JL; Rego, G;
Publication
JOURNAL OF LIGHTWAVE TECHNOLOGY
Abstract
In this study, we investigated the temperature behavior of phase-shifted long-period fiber gratings (PS-LPFGs) inscribed in two types of optical fiber: B/Ge and SMF28. The experiments were carried out from 5 to 305 K using a superconducting quantum interference device magnetometer. The average temperature sensitivity obtained of -0.43 nm/K for PS-LPFGs inscribed in the B/Ge fiber is one order of magnitude larger than for PS-LPFGs inscribed in the SMF28 fiber, in the 60-240 K range. Values ranging from -0.08 nm/K up to 0.2 nm/K were obtained in the 5-35 K temperature range, which are considerably better than previous results achieved for metal-coated FBGs and also for LPFGs inscribed in a similar B/Ge codoped fiber. Nevertheless, further work is required in order to correctly address sensor reliability.
2015
Authors
Ferreira, MS; Roriz, P; Bierlich, J; Kobelke, J; Wondraczek, K; Aichele, C; Schuster, K; Santos, JL; Frazao, O;
Publication
OPTICS EXPRESS
Abstract
In this work, a Fabry-Perot cavity based on a new silica tube design is proposed. The tube presents a cladding with a thickness of similar to 14 mu m and a hollow core. The presence of four small rods, of similar to 20 mu m diameter each, placed in diametrically opposite positions ensure the mechanical stability of the tube. The cavity, formed by splicing a section of the silica tube between two sections of single mode fiber, is characterized in strain and temperature (from room temperature to 900 degrees C). When the sensor is exposed to high temperatures, there is a change in the response to strain. The influence of the thermal annealing is investigated in order to improve the sensing head performance. (C)2015 Optical Society of America
2015
Authors
Rocco Giraldi, MTMR; Fernandes, CS; Ferreira, MS; de Sousa, MJ; Jorge, P; Costa, JCWA; Santos, JL; Frazao, O;
Publication
MICROWAVE AND OPTICAL TECHNOLOGY LETTERS
Abstract
In this work, it is proposed a technique to implement an intensity sensor based on the generation of a double-reflecting (ghost) signal in optical time domain reflectometry (OTDR). The intensity sensor is supported by a singlemode-multimode-singlemode (SMS) fiber structure combined with a fiber loop mirror (FLM). The results of the displacement sensitivity show linear behavior for both the first-reflecting and double-reflecting signals with linear slopes of approximately -4.5 dB/mm and -6 dB/mm, respectively. The displacement resolution achieved is approximate to 0.28 mm. It is also found that the system is able to read periodic displacement variations in the millisecond time scale applied to the sensing head. (c) 2015 Wiley Periodicals, Inc. Microwave Opt Technol Lett 57:1312-1315, 2015
2015
Authors
Viveiros, D; Ribeiro, J; Ferreira, J; Lopez Aldaba, A; Pinto, AMR; Perez Herrera, RA; Diaz, S; Lopez Gil, A; Dominguez Lopez, A; Esteban, O; Martin Lopez, S; Auguste, JL; Jamier, R; Rougier, S; Silva, SO; Frazao, O; Santos, JL; Flores, D; Roy, P; Gonzalez Herraez, M; Lopez Amo, M; Baptista, JM;
Publication
24TH INTERNATIONAL CONFERENCE ON OPTICAL FIBRE SENSORS
Abstract
It is presented an optical fiber sensing system projected to operate in the demanding conditions associated with coal waste piles in combustion. Distributed temperature measurement and spot gas sensing are requirements for such a system. A field prototype has been installed and is continuously gathering data, which will input a geological model of the coal waste piles in combustion aiming to understand their dynamics and evolution. Results are presented on distributed temperature and ammonia measurement, being noticed any significant methane emission in the short time period considered. Carbon dioxide is also a targeted gas for measurement, with validated results available soon. The assessment of this technology as an effective and reliable tool to address the problem of monitoring coal waste piles in combustion opens the possibility of its widespread application in view of the worldwide presence of coal related fires.
The access to the final selection minute is only available to applicants.
Please check the confirmation e-mail of your application to obtain the access code.