Abstract
Indoor Air Quality (IAQ) describes the air quality of a room, and it refers to the health and comfort of the occupants. Typically, people spend around 90% of their time in indoor environments where the concentration of air pollutants and, occasionally, more than 100 times higher than outdoor levels. According to the World Health Organization (WHO), indoor air pollution is responsible for the death of 3.8 million people annually. It has been indicated that IAQ in residential areas or buildings is significantly affected by three primary factors, they are outdoor air quality, human activity in buildings, and building and construction materials. In this context, this work consists of a real-time IAQ system to monitor thermal comfort and gas concentration. The system has a data acquisition stage, captured by the WSN with a set of sensors that measures the data and send it to be stored on the InfluxDB database and displayed on Grafana. A Linear Regression (LR) algorithm was used to predict the behavior of the measured parameters, scoring up to 99.7% of precision. Thereafter, prediction data is stored on InfluxDB in a new database and displayed on Grafana. In this way, it is possible to monitor the actual measurement data and prediction data in real-time. © 2023, ICST Institute for Computer Sciences, Social Informatics and Telecommunications Engineering.

Abstract
Unmanned aerial vehicles (UAV) are a suitable solution for monitoring growing cultures due to the possibility of covering a large area and the necessity of periodic monitoring. In inspection and monitoring tasks, the UAV must find an optimal or near-optimal collision-free route given initial and target positions. In this sense, path-planning strategies are crucial, especially online path planning that can represent the robot's operational environment or for control purposes. Therefore, this paper proposes an online adaptive path-planning solution based on the fusion of rapidly exploring random trees (RRT) and deep reinforcement learning (DRL) algorithms applied to the generation and control of the UAV autonomous trajectory during an olive-growing fly traps inspection task. The main objective of this proposal is to provide a reliable route for the UAV to reach the inspection points in the tree space to capture an image of the trap autonomously, avoiding possible obstacles present in the environment. The proposed framework was tested in a simulated environment using Gazebo and ROS. The results showed that the proposed solution accomplished the trial for environments up to 300 m3 and with 10 dynamic objects.

Abstract
Special care must be taken when considering robots designed to operate collaboratively, such as a swarm, to prevent these agents from being damaged due to unwanted collisions. This work proposes integrating techniques used to move robots, using the Robot Operating System (ROS) and Python's Scikit-Fuzzy module. Thus, this work developed a fuzzy-controlled collaborative obstacle avoidance system for a type of robot whose dynamics are based on motors' vibration. Thus, these robots were designed to participate in a swarm, and the collision must be avoided. In the search for navigation stability, optimal values were sought for the engines' pulse width modulation (PWM).

Abstract
Increasing population in cities combined with efforts to obtain more sustainable living spaces will require a smarter Solid Waste Management System (SWMS). A critical step in SWMS is the collection of wastes, generally associated with expensive costs faced by companies or municipalities in this sector. Some studies are being developed for the optimization of waste collection routes, but few consider inland cities as model regions. Here, the model region considered for the route optimization using Guided Local Search (GLS) algorithm was Bragança, a city in the northeast region of Portugal. The algorithm used in this work is available in open-source Google OR-tools. Results show that waste collection efficiency is affected by the upper limit of waste in dumpsters. Additionally, it is demonstrated the importance of dynamic selection of dumpsters. For instance, efficiency decreased 10.67% for the best upper limit compared to the traditional collection in the regular selection of dumpsters (levels only). However, an improvement of 50.45% compared to traditional collection was observed using dynamic selection of dumpsters to be collected. In other words, collection cannot be improved only by letting dumpsters reach 90% of waste level. In fact, strategies such as the dynamic selection here presented, can play an important role to save resources in a SWMS.

Abstract
Life in society has initiated a search for comfort and security in social centers. This search generated revolutions within the knowledge about the technologies involved, making the environments automated and integrated. Along with this increase, ecological concerns have also arisen, which have been involved since the design of intelligent buildings, remaining through the years of their use. Based on these two pillars, the present study aims to monitor three central systems inside the apartments of the Apolo Building (Braganca city, Portugal). The electrical energy consumption, water flow, and waste disposal systems are integrated through a single database. The data is sent remotely via WiFi through the microcontroller. For better visualization and analytics of the data, a web application is also developed, which allows for real-time monitoring. The obtained results demonstrate to the consumer his behavior regarding household expenses. The idea of showing the consumer their expenditure is to create an ecological awareness. Through the data collected and the environmental alternatives found, it is possible to observe whether there was a behavior change when receiving this data, either in the short or long term.

Abstract