2007
Authors
Frazao, O; Viegas, J; Caldas, P; Araujo, FM; Ferreira, LA; Santos, JL; Farahi, F;
Publication
Third European Workshop on Optical Fibre Sensors
Abstract
A novel Mach-Zehnder interferometer based on a fibre multimode interference structure combined with a long period fibre grating is proposed. The multimode interference is achieved through the use of a multimode fibre section splices between two sin-le-mode fibres, with a length adjusted to couple a fraction of light into the cladding modes. A LP placed after the multimode fibre couples light back into the fibre core completing the Mach-Zehnder interferometer. The novel configuration was demonstrated as a bending sensor.
2008
Authors
Caldas, P; Jorge, PAS; Araujo, F; Ferreira, LA; Rego, G; Santos, JL;
Publication
19TH INTERNATIONAL CONFERENCE ON OPTICAL FIBRE SENSORS, PTS 1 AND 2
Abstract
In this work, an LPG-based Mach-Zehnder interferometer was evaluated as a sensing structure for environmental refractive index measurement. To interrogate this sensing device, coherence addressing and pseudo-heterodyne processing were used. The impact of stretching, bending and twisting the interferometer on the sensitivity to refractive index changes r was studied. It is shown that, due to the antisymmetric nature of cladding modes in arc-induced LPGs, it is possible to tune the system sensitivity by simple mechanical action.
2008
Authors
Silva, SFO; Frazao, O; Caldas, P; Santos, JL; Araujo, FM; Ferreira, LA;
Publication
19TH INTERNATIONAL CONFERENCE ON OPTICAL FIBRE SENSORS, PTS 1 AND 2
Abstract
It is described a fibre optic sensor for liquid refractive index measurement based on the visibility variations of a Fabry-Perot interferometer with interfering waves generated in a short Bragg grating and in the fibre tip (Fresnel reflection) in contact with the liquid. The sensor was characterized emerging the fibre tip in distilled water with different concentrations of ethylene glycol. A linear relation was obtained, with a readout resolution of similar to 10(-3). It was also observed that the temperature direct cross sensitivity is residual.
2007
Authors
Frazao, O; Caldas, P; Santos, JL; Araujo, FM; Ferreira, LA;
Publication
Third European Workshop on Optical Fibre Sensors
Abstract
In this work it is presented a novel in-fibre modal interferometer based on a non-adiabatic biconical fused taper that couples light between the cladding and the core, combined with the Fresnel reflection at the fibre end. It is observed that the returned liaht from this fibre structure shows a channelled spectrum similar to that of a two-wave Michelson interferometer. The application of this device as a fibre optic flowmeter sensor is demonstrated.
2010
Authors
Rego, G; Caldas, P; Ivanov, O; Santos, JL;
Publication
FOURTH EUROPEAN WORKSHOP ON OPTICAL FIBRE SENSORS
Abstract
A long-period grating written in the SMF-28 fiber was heat treated at 1000 degrees C for 15 days. The spectrum of the grating shifted to longer wavelengths and the amplitude of the cladding mode resonances decreased as a result of structural relaxation. The background loss increased considerably for time longer than 200 h, and this loss is caused by devitrification of the fiber.
2009
Authors
Caldas, P; Jorge, PAS; Araujo, F; Ferreira, LA; Rego, G; Santos, JL;
Publication
Proceedings of SPIE - The International Society for Optical Engineering
Abstract
In this work, an LPG-based Mach-Zehnder modal interferometer with a tapered fiber section between the two LPGs is studied as a sensing structure for measuring environmental refractive index. To interrogate this sensing device, coherence addressing and pseudo-heterodyne processing were used. A fiber taper was made between the two LPGs to improve and tailor the sensitivity of the sensor. Experimental results show that the sensitivity to external refractive index increases with the length of the taper and that the sensitivity enhancement is stronger for lower order cladding modes. © 2009 SPIE.
The access to the final selection minute is only available to applicants.
Please check the confirmation e-mail of your application to obtain the access code.