Abstract
Aerial networks, composed of Unmanned Aerial Vehicles (UAVs) acting as Wi-Fi access points or cellular base stations, are emerging as an interesting solution to provide on-demand wireless connectivity to users, when there is no network infrastructure available, or to enhance the network capacity. This article proposes a traffic aware topology control solution for aerial networks that holistically combines the placement of UAVs with a predictive and centralized routing protocol. The synergy created by the combination of the UAV placement and routing solutions allows the aerial network to seamlessly update its topology according to the users' traffic demand, whilst minimizing the disruption caused by the movement of the UAVs. As a result, the Quality of Service (QoS) provided to the users is improved. The components of the proposed solution are described and evaluated in this article by means of simulation and an experimental testbed. The results show that the QoS provided to the users is significantly improved when compared to the corresponding baseline solutions.

Abstract
The ability to operate virtually anywhere and carry payload makes Unmanned Aerial Vehicles (UAVs) perfect platforms to carry communications nodes, including Wi-Fi Access Points (APs) and cellular Base Stations (BSs). This is paving the way to the deployment of flying networks that enable communications to ground users on demand. Still, flying networks impose significant challenges in order to meet the Quality of Experience expectations. State of the art works addressed these challenges, but have been focused on routing and the placement of the UAVs as APs and BSs serving the ground users, overlooking the backhaul network design. The main contribution of this paper is a centralized traffic-aware Gateway UAV Placement (GWP) algorithm for flying networks with controlled topology. GWP takes advantage of the knowledge of the offered traffic and the future topologies of the flying network to enable backhaul communications paths with high enough capacity. The performance achieved using the GWP algorithm is evaluated using ns-3 simulations. The obtained results demonstrate significant gains regarding aggregate throughput and delay.

Abstract
The ability to operate anywhere, anytime, as well as their capability to hover and carry cargo on board make Unmanned Aerial Vehicles (UAVs) suitable platforms to act as Flying Gateways (FGWs) to the Internet. The problem is the optimal placement of the FGWs within the flying network, such that the Quality of Service (QoS) offered is maximized. The literature has been focused on optimizing the placement of the Flying Access Points (FAPs), which establish high-capacity small cells to serve the users on the ground, overlooking the backhaul network design, including the FGW placement. The FGW placement problem is exacerbated in highly dynamic flying networks, where the dynamic traffic demand and the movements of the users may induce frequent changes in the placement of the FAPs. The main contribution of this paper is a fast gateway placement (F-GWP) algorithm for flying networks that determines the optimal position of a FGW. With F-GWP, backhaul communications paths with high enough capacity are established between the FAPs and the FGW, in order to accommodate the traffic demand of the users on the ground. Simulation and experimental results show F-GWP is two orders of magnitude faster than its state of the art counterpart, while ensuring the same flying network performance.

Abstract
Network slicing emerged in 5G networks as a key component to enable the use of multiple services with different performance requirements on top of a shared physical network infrastructure. A major challenge lies on ensuring wireless coverage and enough communications resources to meet the target Quality of Service (QoS) levels demanded by these services, including throughput and delay guarantees. The challenge is exacerbated in temporary events, such as disaster management scenarios and outdoor festivities, where the existing wireless infrastructures may collapse, fail to provide sufficient wireless coverage, or lack the required communications resources. Flying networks, composed of Unmanned Aerial Vehicles (UAVs), emerged as a solution to provide on-demand wireless coverage and communications resources anywhere, anytime. However, existing solutions mostly rely on best-effort networks. The main contribution of this paper is SLICER, an algorithm enabling the placement and allocation of communications resources in slicing-aware flying networks. The evaluation carried out by means of ns-3 simulations shows SLICER can meet the targeted QoS levels, while using the minimum amount of communications resources.

Abstract
Short reaction times are among the most important factors in preventing casualties or providing first assistance to potential victims during large scale natural disasters. Consequently, first response teams must quickly gain a comprehensive overview and thus situation awareness of the disaster situation. To address this challenge, the ResponDrone-platform was developed within the scope of the ResponDrone project. A fleet of unmanned aerial vehicles provides critical information from the disaster site to the first response teams in real-time and can act as a communications relays in areas with disrupted communications infrastructure. The unmanned aerial vehicles are commanded via a web-based multi-mission control system. Data sharing between the individual components is realized via a web-based cloud platform. The ResponDrone platform's capabilities were successfully tested and validated within the scope of several flight and simulation trials. This paper describes the components that were developed, integrated into a system-of-systems and demonstrated during the ResponDrone project and explains how the components work together in order to execute task-based multi-UAV missions. Further, the results of the validation trials are presented and an outlook on the next steps for further exploitation of the ResponDrone platform is given. © 2022 IEEE.

Abstract
5G has become increasingly popular nowadays, mainly due to its characteristics which enable high data rates and low latency. At the same time, mobile robotic platforms, such as drones and robots, appeared as suitable platforms to carry radio stations, enabling the on-demand placement of 5G communications cells. The main contribution of this paper is an obstacle-aware on-demand 5G network. The proposed solution consists of a 5G radio station (gNB) carried by a mobile robotic platform capable of providing obstacle-aware wireless connectivity to 5G User Equipments (UEs), leveraged by a novel virtual network function - On-Demand Mobility Management Function (ODMMF). ODMMF is designed to integrate the 5G Core network and it allows to monitor the radio conditions provided to the served UEs, while enabling the positioning of the mobile robotic platform remotely by taking advantage of the visual information provided by on-board video cameras. The proposed solution was validated using an experimental prototype, under a representative networking scenario.