Cookies Policy
The website need some cookies and similar means to function. If you permit us, we will use those means to collect data on your visits for aggregated statistics to improve our service. Find out More
Accept Reject
  • Menu
Publications

Publications by Diana Filipa Guimarães

2018

Characterization of arsenic in dried baby shrimp (Acetes sp.) using synchrotron-based X-ray spectrometry and LC coupled to ICP-MS/MS

Authors
Guimaraes, D; Roberts, AA; Tehrani, MW; Huang, R; Smieska, L; Woll, AR; Lin, S; Parsons, PJ;

Publication
JOURNAL OF ANALYTICAL ATOMIC SPECTROMETRY

Abstract
The arsenic content of dried baby shrimp (Acetes sp.) was investigated as part of an independent field study of human exposure to toxic metals/metalloids among the ethnic Chinese community located in Upstate New York. The dried baby shrimp were analyzed in a home environment using a portable X-Ray Fluorescence (XRF) instrument based on monochromatic excitation. Study participants had obtained their dried baby shrimp either from a local Chinese market or prepared them at home. The shrimp are typically between 10-20 mm in size and are consumed whole, without separating the tail from the head. Elevated levels of As were detected using portable XRF, ranging between 5-30 g g(-1). Shrimp samples were taken to the Cornell High Energy Synchrotron Source (CHESS) for Synchrotron Radiation XRF (SR-XRF) elemental mapping using a 384-pixel Maia detector system. The Maia detector provided high resolution trace element images for As, Ca, and Br, (among others) and showed localized accumulation of As within the shrimp's cephalothorax (head), and various abdominal segments. As quantification by SR-XRF was performed using a lobster hepatopancreas reference material pellet (NRC-CNRC TORT-2), with results in good agreement with both portable XRF and ICP-MS. Additional As characterization using X-ray Absorption Near Edge Spectroscopy (XANES) with the Maia XRF detector at CHESS identified arsenobetaine and/or arsenocholine as the possible As species present. Further arsenic speciation analysis by LC-ICP-MS/MS confirmed that the majority of As (>95%) is present as the largely non-toxic arsenobetaine species with trace amounts of arsenocholine, methylated As and inorganic As species detected.

2018

Development of a new system for real-time detection of radon using scintillating optical fibers

Authors
Monteiro, CS; Coelho, L; Barbosa, SM; Guimarães, D;

Publication
Optics InfoBase Conference Papers

Abstract
A remote sensor for radon continuous measurement using polymeric scintillation optical fibers was developed and evaluated. Successful preliminary results showed detection of natural occurring radon from a container with rocks rich in uranium oxides. © OSA 2018 © 2018 The Author(s)

2019

A study of lead uptake and distribution in horns from lead-dosed goats using synchrotron radiation-induced micro X-ray fluorescence elemental imaging

Authors
Tehrani, MW; Huang, R; Guimaraes, D; Smieska, L; Woll, A; Parsons, PJ;

Publication
JOURNAL OF TRACE ELEMENTS IN MEDICINE AND BIOLOGY

Abstract
Objective: The principal goal of this study was to investigate the uptake and distribution of lead (Pb) in the horns of Pb-dosed goats, and to explore possible links to their historical Pb dosing records. Horn is a keratinized material that grows in discrete increments with the potential to preserve the historical record of past environmental exposures. While previous studies have leveraged this potential to examine environmental and biological phenomena in horns, Pb uptake has never been explored. Methods: Horns were collected post-mortem from three goats that had been previously used to produce blood lead reference materials for the New York State proficiency testing program. The animals were periodically dosed with lead acetate, administered orally in a capsule, over a 5 to 8-year period. Horn cross sections were taken from each animal and analyzed using synchrotron radiation-induced micro X-ray fluorescence spectrometry (SR-ARE) at the Cornell High Energy Synchrotron Source (CHESS). Results: Elemental distribution maps were obtained by SR-mu XRF for Pb, Ca, S, Se, and three other elements (Br, Zn and Cu), with values reported quantitatively as a mass fraction (mu g/g for trace elements and mg/g for Ca and S). Accumulations of Pb were clearly visible as a series of narrow "rings" in each of the horn samples analyzed. The elements Ca, S, Br, Zn, and Cu were also detected as discrete rings within each cross-section, with Br strongly correlated with S in the samples examined. A marginal increase in Se may coincide with Pb accumulation in horn cross-sections. Annual mineralization estimates based on the relative distribution of Ca and S were used to establish a tentative timeline for horn growth, with each timeline linked to the pattern of Pb accumulation in the corresponding horn cross-section sample. Conclusions: Following ingestion, absorbed Pb is eventually deposited into caprine horns, resulting in discrete accumulations or "rings." Elemental mapping by SR-mu XRF clearly show Ca-rich layers that vary with annual periodicity, consistent with previous reports of horn mineralization. Localized enrichment of Cu, Zn, Br and S appear to coincide with the keratinized regions related to the annual growth ring pattern in horns. Spatial analysis of horns for Pb accumulation may be useful as a qualitative marker of time-resolved exposures that may reflect specific periods of acute Pb absorption.

2019

Application of a novel LIBS prototype as an analytical grade tool for Li quantification in pegmatite samples

Authors
Guimaraes, D; Ferreira, MFS; Ribeiro, R; Dias, C; Lima, A; Martins, RC; Jorge, PAS;

Publication
FOURTH INTERNATIONAL CONFERENCE ON APPLICATIONS OF OPTICS AND PHOTONICS

Abstract
A high-resolution advanced laser induced breakdown spectroscopy prototype was used to quantify lithium (Li) in lithiniferous rocks. Samples were collected from Barroso's mine (Portugal), claimed as Western Europe's largest spodumene Li discovery. 51 samples from a reverse circulation drill were collected, one for each meter interval, dried, milled, pressed into pellets and further analyzed by laser induced breakdown spectroscopy. Quantification was attempted using either linear models based on the intensity of selected Li spectral lines or advanced chemometrics methods. The latter was very successful, with correlation coefficients of 0.97 against certified laboratory results.

2019

Plasma control by pattern recognition in laser induced breakdown spectroscopy

Authors
Ferreira, MFS; Guimaraes, D; Jorge, PAS; Martins, RC;

Publication
FOURTH INTERNATIONAL CONFERENCE ON APPLICATIONS OF OPTICS AND PHOTONICS

Abstract
A low-computational intensive laser control approach is proposed for implementing an embedded control system, using pattern recognition by relevant principal component analysis for laser induced breakdown spectroscopy applications. The laser energy is directly related to the resulting spectral pattern and is determined by iterations in the feature space. Results show that single shot iterations until optimum energy can be significantly reduced by pattern recognition. A performance benchmark with minerals, alloys and pellets from material collected from a drill demonstrated an average of 50% improvement, significantly reducing sample deterioration and improving measurement safety.

2021

X-ray Fluorescence and Laser-Induced Breakdown Spectroscopy Analysis of Li-Rich Minerals in Veins from Argemela Tin Mine, Central Portugal

Authors
Ribeiro, R; Capela, D; Ferreira, M; Martins, R; Jorge, P; Guimaraes, D; Lima, A;

Publication
MINERALS

Abstract
In this work, X-ray fluorescence (XRF) and Laser-induced breakdown spectroscopy (LIBS) analyses were applied to samples of quartz, montebrasite, and turquoise hydrothermal veins in the Argemela Tin Mine (Central Portugal). Montebrasite (LiAl(PO4)(OH,F)) is potentially the main ore mineral; with its alteration, lithium (Li) can disseminate into other minerals. A hand sample was cut and analyzed by XRF and LIBS for several elements of interest including Cu, P, Al, Si, and Li. Although XRF cannot measure Li, results from its analysis are effective for distinguishing turquoise from montebrasite. LIBS analysis complemented this study, making it possible to conclude that turquoise does not contain any significant Li in its structure. The difference in spot size between the techniques (5 mm vs. 300 mu m for XRF and LIBS, respectively) resulted in a poorer performance by XRF in accurately identifying mixed minerals. A thin section was petrographically characterized and mapped using LIBS. The mapping results demonstrate the possibility of the successful identification of minerals and their alterations on a thin section. The results of XRF analysis and LIBS mapping in petrographic sections demonstrate the efficacy of these methods as tools for element and mineral identification, which can be important in exploration and mining phases, complementing more traditional techniques.

  • 2
  • 6