Abstract
A reflective multimode interference based-fiber optic sensor is described, aimed at measuring refractive index variations by means of intensity variation based on the fiber tip-interaction concept. The sensing head is a section of a multimode fiber, spliced to a single-mode fiber at the input end; its characteristics are studied when two multimode fibers, with distinct core diameters (viz. 50 and 105 mu m), are considered. The multimode fiber end face is placed in contact with the liquid sample, so as to provide a refractive index measurement via variation in amplitude of the interference spectral peaks - which is essentially insensitive to temperature changes. Therefore, the proposed configuration permits measurement of refractive index variations free from system temperature cross-sensitivity effects. Resolutions of 2.2 x 10(-4) RIU and 3.8 x 10(-4) RIU, for multimode fiber tips with core diameters of 50 mu m and 105 mu m, respectively, could be achieved.

Abstract
This work describes a fibre optic sensing structure that is sensitive to curvature, and features a low temperature- and strain cross-sensitivity. It is based on multimode interference, and relies on a single mode - step index multimode - single mode fibre configuration. It was observed that the transmitted optical power in such layout becomes highly sensitive to the wavelength of operation and to the length of the multimode fibre. The optical spectrum entertains two dominant loss bands, at wavelengths that have similar responses both to temperature and strain, and different responses to curvature. Based on this result, an interrogation approach is proposed that permits substantial sensitivity to curvature (8.7 +/- 0.1 nm.m) and residual sensitivities to temperature and strain (0.3 +/- 0.1 pm/degrees C and -0.06 +/- 0.01 pm/mu epsilon, respectively).

Abstract
This work describes a large-core air-clad photonic crystal fibre-based sensing structure that is sensitive to refractive index, temperature and strain. The sensing head is based on multimodal interference, and relies on a single mode - large-core air-clad photonic crystal fibre - single mode fibre configuration. Using two distinct large-core air-clad PCF geometries it is possible to obtain an optical spectrum with two dominant loss bands, at wavelengths that have different sensitivities to physical parameters. This characteristic is explored to demonstrate a sensing head that permits the strain-temperature discrimination functionality. It is also shown the large-core air-clad photonic crystal fibre can be applied to implement a sensing head sensitive to the water refractive index changes induced by temperature variations.

Abstract
It is described a fibre optic sensor for liquid refractive index measurement based on the visibility variations of a Fabry-Perot interferometer with interfering waves generated in a short Bragg grating and in the fibre tip (Fresnel reflection) in contact with the liquid. The sensor was characterized emerging the fibre tip in distilled water with different concentrations of ethylene glycol. A linear relation was obtained, with a readout resolution of similar to 10(-3). It was also observed that the temperature direct cross sensitivity is residual.

Abstract
Optical fibre sensors for Hydrogen detection at low concentrations has become a growing research area using Palladium as an active medium. Palladium is widely used in hydrogen sensing as it show a high and selective affinity for hydrogen. This metal is capable to absorb hydrogen up to 900 times its own volume which permits that during the expansion mechanical forces are applied in the fibre modifying the optical response. Several optical fibre hydrogen sensor heads coated with Palladium are presented and compared using different working principles: interferometric, intensity and fiber grating-based sensors. These principles were applied in Fabry-Perot cavities, fibre Bragg gratings written in fibre SMF28 with etching in the cladding, multimode interferometers and fibre end micro-mirrors. Palladium thin film coatings over the fibre surface and with thicknesses from 10nm to 350nm were produced by using the sputtering RF technique. These studies were performed in a Hydrogen/Nitrogen atmosphere with Hydrogen concentrations from 0% to 4% (lower limit explosion). The Bragg grating inscribed in a fibre with reduced cladding diameter appears to be one of the best approaches for a fibre optic sensing head for Hydrogen detection. Future work will continue the investigation of other fibre optic structures with Hydrogen sensing capabilities and their application in specific field situations will be assessed.

Abstract
An all fibre Mach-Zehnder interferometric configuration based on a suspended twin-core fibre is described. Due to the birefringence of the fibre cores, two interferometers were obtained by illuminating the fibre with polarized light. Applying strain, curvature and temperature to the sensing head, different sensitivities were observed, which permits the use of the matrix method to discriminate these three measurands.