Abstract
This paper evaluates the flexibility provided by distributed energy resources (DER) in a real electricity distribution network in Germany. Using the Interval Constrained Power Flow (ICPF) tool, the maximum range of flexibility available at the primary substation was obtained for different operation scenarios. Three test cases were simulated, differing mainly in the considered level of renewable energy sources (RES) production. For each test case, the obtained results enabled the construction of flexibility areas that define, for a given operating point, the limits of feasible values for the active and reactive power that can be exchanged between the TSO and the DSO. Furthermore, the tool can also be used to evaluate the contribution from each type of DER to the overall distribution network flexibility.

Abstract

Abstract
The smart grid concept increases the observability and controllability of the distribution system, which creates conditions for bi-directional control of Distributed Energy Resources (DER). The high penetration of Renewable Energy Resources (RES) in the distribution grid may create technical problems (e.g., voltage problems, branch congestion) in both transmission and distribution systems. The flexibility from DER can be explored to minimize RES curtailment and increase its hosting capacity. This paper explores the use of the Monte Carlo Simulation to estimate the flexibility range of active and reactive power at the boundary nodes between transmission and distribution systems, considering the available flexibility at the distribution grid level (e.g., demand response, on-load tap changer transformers). The obtained results suggest the formulation of an optimization problem in order to overcome the limitations of the Monte Carlo Simulation, increasing the capability to find extreme points of the flexibility map and reducing the computational effort.

Abstract
This paper presents two contributions developed in the framework of evolvDSO Project to support TSO-DSO cooperation. The Interval Constrained Interval Power Flow (ICPF) tool estimates the flexibility range at primary substations by aggregating the distribution network flexibility. The Sequential Optimal Power Flow (SOPF) tool defines a set of control actions that keep the active and reactive power flow within pre-agreed limits at primary substations level, by integrating different types of flexibility levers. Several study test cases were simulated using data of four real distribution networks from France and Portugal, with different demand/generation profiles and several degrees of flexibility.

Abstract
Current electrical distribution systems are facing significant challenges due to the widespread deployment of Distributed Energy Resources (DER), particularly the integration of variable Renewable Energy Sources (RES). This requires a change in the paradigm of distribution grids from a purely passive perspective into fully active networks within the smart grid vision. This new paradigm involves new control and management architectures as well as advanced planning methods and operational tools for distribution systems exploiting a smart metering infrastructure. This infrastructure will enable leveraging data from smart meters and short-term forecasts of load demand and RES in order to manage the distribution system in a more efficient and cost-effective way, thus enabling large scale integration of RES. Future tests to be carried out in a new, state of the art laboratory environment will bring additional added-value to the validation of the proposed concepts and tools.

Abstract
This paper presents an innovative Power System Restoration (PSR) that exploits the flexibility offered by large offshore wind parks, in particular with HVDC connection with Voltage Source converter (VSC) technology, to support restoration following a black out in a typical transmission grid. Restoration sequences comparing different strategies in a VHV AC network with conventional generation (thermal units and hydro units) were implemented for two cases: with and without the participation of a large offshore wind farm in the restoration plan. In order to evaluate the benefit of using Utility scale Wind Parks to support PSR, a typical transmission network with all its models (including HVDC link with DC converter) was implemented in EUROSTAG simulation platform. © 2013 IEEE.