Abstract
Operating isolated power systems with increasing shares of renewable energy sources requires the integration of battery energy storage systems in order to assure enhanced frequency regulation capabilities. The control mode of power converters interfacing battery energy storage systems to the grid can be based on grid-forming type structures given its superior performance with respect to the mitigation of network frequency disturbances. Nevertheless, in case of network faults, the interactions between existing synchronous units and the grid-forming type converters may adversely affect the global system behavior. Therefore, this paper addresses the study-case of a MW-scale isolated power system with large shares of converter-interfaced renewable generation, operating with both synchronous machines and a grid-forming type power converter. An optimal grid-forming control parameter tuning procedure considering different disturbances is presented, aiming to reduce the associated battery energy storage system power regulating effort following the disturbances. Moreover, it is proposed and discussed the need of a novel rule-based adaptive control solution to switch between different sets of control parameters used in grid-forming type converters depending on the network status following a fault-type disturbance. Extensive numerical simulations performed over different operating scenarios illustrate the performance of the proposed solution.

Abstract
The Smart Transformer (ST) is being envisioned as the possible backbone of future distribution grids given the enhanced controllability it provides. Moreover, the ST offers DC-link connectivity, making it an attractive solution for the deployment of hybrid AC/DC distribution grids which offer important advantages for the deployment of Renewable Energy Sources, Energy Storage Systems (ESSs) and Electric Vehicles. However, compared to traditional low-frequency magnetic transformers, the ST is inherently more vulnerable to fault disturbances which may force the ST to disconnect in order to protect its power electronic converters, posing important challenges to the hybrid AC/DC grid connected to it. This paper proposes a Fault-Ride-Through (FRT) strategy suited for grid-tied ST with no locally available ESS, which exploits a dump-load and the sensitivity of the hybrid AC/DC distribution grid's power to voltage and frequency to provide enhanced control to the ST in order to handle AC-side voltage sags. The proposed FRT strategy can exploit all the hybrid AC/DC distribution grid (including the MV DC sub-network) and existing controllable DER resources, providing FRT against balanced and unbalanced faults in the upstream AC grid. The proposed strategy is demonstrated in this paper through computational simulation.

Abstract
With the expansion of power electronics possibilities for smart homes, new perceptions for power control are emerging, suggesting new possibilities also for smart grids. In this prospect, the solid-state transformer (SST) has a substantial impact to interface smart homes with smart grids, guaranteeing high levels of power quality in both grid (consumed current) and load side (produced voltage). Nevertheless, as advanced contributions, the SST can deal with other possibilities of controllability. In such situation, an analysis of new operation opportunities for the SST into smart homes and smart grid perspectives is offered in this paper. It is discussed the SST principle of operation, with a thorough clarification concerning the proposed control algorithms, as well as an intuitive computational validation contemplating contingencies of operation about power quality effects for the load and grid side. The attained results strengthen the attractiveness of the new operation opportunities for the SST when utilized as interface between homes and smart grids.

Abstract

Abstract
The decarbonization of the economy and the increasing integration of renewable energy sources into the generation mix are bringing new challenges, requiring novel technological solutions in the topic of smart grids, which include smart transformers and energy storage systems. Additionally, power quality is a vital concern for the future smart grids; therefore, the continuous development of power electronics solutions to overcome power quality problems is of the utmost importance. In this context, this article proposes a novel three-phase multiobjective unified power quality conditioner (MO-UPQC), considering interfaces for solar PV panels and for energy storage in batteries. The MO-UPQC is capable of compensating power quality problems in the voltages (at the load side) and in the currents (at the power grid side), while it enables injecting power into the grid (from the PV panels or batteries) or charging the batteries (from the PV panels or from the grid). Experimental results were obtained with a three-phase four-wire laboratory prototype, demonstrating the feasibility and the large range of applications of the proposed MO-UPQC.

Abstract
In isolated power systems with very high instantaneous shares of renewables, additional inertia should be used as a complementary resource to battery energy storage systems (BESSs) for improving frequency stability, which can be provided by synchronous condensers (SCs) integrated into the system. Therefore, this paper presents a methodology to infer the system dynamic security, with respect to key frequency indicators, following critical disturbances. Of particular interest is the evidence that multiple short-circuit locations should be considered as reference disturbances regarding the frequency stability in isolated power grids with high shares of renewables. Thus, an artificial neural network (ANN) structure was developed, aiming to predict the network frequency nadir and Rate of Change of Frequency (RoCoF), considering a certain operating scenario and disturbances. For the operating conditions where the system frequency indicators are violated, a methodology is proposed based on a gradient descent technique, which quantifies the minimum amount of additional synchronous inertia (SCs which need to be dispatch) that moves the system towards its dynamic security region, exploiting the trained ANN, and computing the sensitivity of its outputs with respect to the input defining the SC inertia.