Abstract
A new wearable data capture system for gait analysis is being developed. It consists of a pantyhose with embedded conductive yarns interconnecting customized sensing electronic devices that capture inertial and electromyographic signals and sends aggregated information to a personal computer through a wireless link. The use of conductive yarns to build the myoelectric electrodes and the interconnections of the wired sensors network, as well as the topology and functionality of the sensor modules are presented.

Abstract
This paper presents a network circuit for wearable low-power BAN (Body Area Networks) applications, geared towards mesh network topologies with conductive yarns as transmission channels. The design and implementation of the physical and MAC layers is described. The resulting circuit sends and receives data simultaneously, and experimental results indicate that the proposed system works with variable data rates, up to a maximum of 9+9 Mbps. All reported measurements were collected from working FPGA-based prototypes, and the performance achieved shows that the circuit is suitable for use in reliable high-speed low-power BAN applications. © 2012 IEEE.

Abstract
The paper presents a method for generating partial bitstreams on-line for use in systems with run-time reconfigurable FPGAs. Bitstream creation is performed at run-time by merging partial bitstreams from individual component modules. The process includes the capability to create connections between the modules by selection from a set of routes found during an off-line pre-processing step. Placement and interconnection of modules must follow a precise set of rules. While restricting the number of possible module arrangements, this approach allows bitstream, creation to be performed with relatively few computational resources. Using a demonstration system with a Virtex-II Pro FPGA with a PowerPC 405 CPU, the process of creating at run-time a partial bitstream for 22% of the device area takes 24 ms.

Abstract
A tool called BITLINKER, that creates partially reconfigurable modules from the bit-streams of individual components is described. It is also capable of performing restricted component placement and interconnect routing between the assembled components. The resulting modules are used in applications that exploit partial dynamic reconfiguration. The tool is integrated in a design flow particularly aimed at dynamically reconfigurable platform field-programmable gate arrays (FPGAs). The associated development design flow and a run-time support system that can be used to manage module activation and data communication are described. Evaluation results obtained with a Virtex-II Pro system are also reported.

Abstract
Run-time partial reconfiguration of programmable hardware devices can be applied to enhance many applications in high-end embedded systems, particularly those that employ recent platform FPGAs. The effective use of this approach is often hampered by the complexity added to the system development process and by limited tool support. The paper is concerned with several aspects related to the effective exploitation of run-time partial reconfiguration, with particular emphasis on the generation of partial configurations and the run-time utilisation of the reconfigurable resources. The paper presents an approach inspired by the traditional software development: partial configurations are produced by assembling components from a previously created library, thus enabling the embedded application developer to produce the configuration data required for run-time modifications with less effort than is needed with the conventional design flow. A tool that supports this approach is also described. A second set of issues is addressed by a run-time support library that provides facilities for managing the hardware reconfiguration process and the communication with the reconfigured circuits. The use of run-time partial reconfiguration requires a high level of system support. The paper describes one possible approach, presenting a demonstration system developed to support the present work and characterising its performance. In order to clarify the advantages of the approach to run-time reconfigiaration discussed in the paper, two small case studies are described, the first on the use of dedicated datapaths for subword operations and the second on two-dimensional pattern-matching for bilevel images. Timing measurements for both cases are included.

Abstract
This paper presents and evaluates a method of generating partial bitstreams at run-time for dynamic reconfiguration of sections of an FPGA. The method is intended for use in adaptive embedded systems that employ run-time reconfiguration to achieve high flexibility and performance. The proposed approach combines partial bitstreams of coarse-grained components to produce a new partial bitstream implementing a given circuit netlist. Topological sorting of the netlist is used to determine the initial positions of individual components, whose placement is then improved by simulated annealing. Connection routing is done by a breadth-first search of the reconfigurable area based on a simplified resource model of the reconfigurable fabric. The desired partial bitstream is constructed by merging together the default bitstream of the reconfigurable area, the relocated partial bitstreams of the components, and the configurations of the switch matrices used for routing. The approach is embodied in a code library that applications can use to create new bitstreams at run-time. For the members of a set of 29 benchmarks (both synthetic and application-derived) having between five and 41 components, the complete process of bitstream generation takes between 8 s and 35 s when running on an embedded PowerPC 405 microprocessor clocked at 300 MHz.