Abstract
This paper presents a decentralized architecture for the islanding operation of distribution grids with large volume of distributed generation. This architecture involves the definition of network blocks which share the responsibility of frequency control. The control block abstraction was particularly designed to support the transition from regular grids to smart grids. In addition, the control schemes were developed using an agent-based paradigm. Hence, an agent-based simulation platform was implemented using libraries from the Java Agent Development Framework (JADE). The control schemes were evaluated using a test system with different sorts of distributed energy resources and modeled in the EUROSTAG environment. Simulation results show the effectiveness of the control architecture when different failure events are applied to the test system.

Abstract
The Smart Grid vision along with the future deployment of Electric Vehicles presents numerous challenges in terms of grid infrastructure, communication, and control. In this context, Advanced Metering Infrastructure solutions are envisioned to be the active management link between utilities and consumers. This paper presents a survey of potential AMI functionalities particularly developed to foster the large scale deployment of EV in Smart Grids. For this accomplishment, the concepts of Automated Meter Reading, Automatic Meter Management and Smart Metering are revisited. Furthermore, different EV charging approaches are outlined and included in the functionalities under the Vehicle-To-Grid framework. Finally, AMI use cases are described under the Vehicle-to-Home perspective.

Abstract
This paper presents a methodology to make EV able to contribute to secondary frequency regulation, by participating in Automatic Generation Control (AGC). The aggregator entity is used in this methodology to act as intermediate between the AGC and the EV controllers. The case-study used is an approximation of the Portuguese transmission/generation network, including existing tie lines with Spain, to which a solid three-phase short circuit was applied. After the disturbance, the impact of EV in the AGC operation was studied for two different situations: EV contributing to secondary frequency regulation and EV behaving as uncontrollable loads. The results obtained for both situations were then compared, in terms of interconnection active power flows in the existing tie-lines and its re-establishment time. ©2010 IEEE.

Abstract
This paper investigates dynamic stability and control design of modern electric energy systems as many MW-scale distributed generators (DG) of various types are deployed in the distribution side of electric systems. The paper is mainly concerned about small-signal frequency stability of distribution systems with decentralized or centralized control systems. The Gerschgorin Circle Theory and Hicks Stability Theory are used for verifying sufficient conditions for small-signal stability. The paper also discusses about designing advanced enhancing robustness methods to ensure both safety and stability of modern distribution systems. Finally, the paper closes with a discussion of policies needed to support large penetration of DG units in distribution systems to ensure safety and robustness of the system. ©2010 IEEE.

Abstract
This paper describes technical solutions to be adopted by Electric Vehicles (EV) battery grid interfaces, in order to get the provision of ancillary services to the grid. The developed solution exploits an EV battery charge control approach based in a grid cooperative response to frequency and/or voltage deviations. To be effective, those cooperative actions must result from both centralized/coordinated commands and local/individual EV charger response to the grid behaviour. In a scenario characterized by a massive deployment of EV, the adoption of such a solution allows an improvement on the power system dynamic behaviour, namely in small island grids. ©2010 IEEE.

Abstract
This paper describes a statistical approach developed for assessing the impacts resulting from EV presence in a given electricity network was developed. The algorithm, developed for this purpose, is based on a Monte Carlo method and can be seen as a planning tool that allows obtaining average values for several system indexes, like buses voltages, branches loading and energy losses. Additionally, it also allows identifying the most critical operation scenarios and the network components that are subjected to more demanding conditions and that might need to be upgraded. The example of a small grid from one of the Azores islands, Flores Island, was used for illustration purposes and two scenarios of EV integration were considered: 25% and 50% of the current light vehicles fleet replaced by EV. ©2010 IEEE.