Abstract
A polyamide 6,6 (PA66) fabric pre-treated with a double barrier dielectric (DBD) atmospheric plasma in air was coated with 1 and 5 layers of an intrinsically conducting glycerol-doped PEDOT:PSS polymer (PEDOT:PSS + GLY) with the final objective of developing a cost-competitive and temperature controllable flexible-heating element to be used in clothing encapsulated between an outer and an inner separator layer in order to provide heat-reflecting properties and uniform temperature distribution, respectively. FTIR, DSC, TGA, SEM, EDS, XRD and DMA analyses show significant changes in morphology, chemistry, enthalpy, crystallinity and glass transition temperature confirming that PEDOT:PSS and glycerol are not only spread over the PA66 yarn surfaces but are dispersed in the bulk facilitating relaxation and increasing structure and chain flexibility. Electrochemical and electrical resistivity (rho) measurements confirm that the plasma treated PA66 coated with 5 layers of PEDOT:PSS + GLY presents the highest stability, resistance and capacitive behaviour, and the best capability of storing electrical energy. This configuration needs only 7.5 V to induce a temperature change up to 38 degrees C at a current density of 0.3 A g(-1). The desired temperature is easily adjustable as a function of the applied voltage and by the number of coated layers of PEDOT:PSS + GLY. Despite the need to improve the uniformity of the coating thickness on the fabric for uniform heat generation, the observed results are quite impressive since they can be compared to the temperature obtained in carbon nanotube composites using similar voltages. This cost-competitive, safe, highly flexible and stable thermoelectric fabric has potential for use in large area textiles as a heating element in a wide range of applications such as garments, carpets, blankets and automotive seats.

Abstract
INESC TEC is strongly committed to become a center of excellence in maritime technology and, in particular, deep sea technology. The STRONGMAR project aims at creating solid and productive links in the global field of marine science and technology between INESC TEC and established leading research European institutions, capable of enhancing the scientific and technological capacity of INESC TEC and linked institutions, helping raising its staff's research profile and its recognition as a European maritime research center of excellence. The STRONGMAR project seeks complementarity to the TEC4SEA research infrastructure: on the one hand, TEC4SEA promotes the establishment of a unique infrastructure of research and technological development, and on the other, the STRONGMAR project intends to develop the scientific expertise of the research team of INESC TEC.

Abstract
A new small-sized autonomous surface vehicle actuated by a water-jet has been developed at INESC TEC for search and rescue of victims at sea. This paper describes the vehicle main components and presents the control and guidance laws governing the motion and enabling it to perform line-following and target tracking missions. Results from field trials are presented, demonstrating the capabilities and the performances of the vehicle along with its control layer.

Abstract
Today, in our landscape perception exists a gap that needs to be fulfilled. It's important to increase the coverage, temporal and spatial resolution in order to cover this gap, as well as reduce costs with human resources that usually take this kind of tasks. Unmanned Autonomous vehicles with their inherent autonomy and reduced needs of human and communication resources, can provide additional capabilities and a new innovative solution to this problem This paper presents and describes the participation of ICARUS Team at euRathlon 2015 and the importance of this type of events performed with multiple unnamed systems.

Abstract
The direction of arrival of sound waves has been extensively used for passive acoustic tracking of underwater sound sources, such as marine mammals or ultrasonic electronic tags attached to animals or submerged equipment. This process can be automated by measuring the time difference of arrival (TDOA) of the sound wave arriving to two or more hydrophones and then calculating the relative direction of the acoustic source using those time differences. Although the generalized cross-correlation between the received signals is a common technique for determining the TDOA, the underwater environment introduces several distortions in amplitude and phase of the received sound waves due to reflections and reverberation, particularly in confined spaces. This is aggravated by the variation of the sound propagation speed with temperature, pressure and salinity. Because of this, the use of the cross-correlation method not effective to determine the TDOA especially when using single frequency pulses as the transmitted signal. In this work we propose an alternative method to calculate the TDOA, consisting in the analysis of the initial part of the received signals to discover a series of similar zero-crossing periods to identify their beginning, and then calculating the time difference between them. We have implemented this technique in a reconfigurable system-on-chip, attaching to an embedded ARM processor a custom designed digital signal processing system. This has been tested in a test tank and in outside environment. This system is capable of computing in real-time the 2D direction of an underwater acoustic transmitter, and combining the different directions resulting from the relative movement between transmitter and receiver it is possible to estimate the relative position of the acoustic source.

Abstract
The ocean and the Blue Economy are increasingly top priorities worldwide. The immense ocean territory in the planet and its huge associated economical potential is envisioned to increase the activity at the ocean in the forthcoming years. The support of these activities, and the convergence to the Internet of Things paradigm, will demand wireless and mobile communications to connect humans and systems at remote ocean areas. Currently, there is no communications solution enabling cost-effective broadband Internet access at remote ocean areas in alternative to expensive, narrowband satellite communications. This paper presents the maritime communications solution being developed in the BLUECOM+ project. The BLUECOM+ solution enables cost-effective broadband Internet access at remote ocean areas using standard wireless access technologies, e.g., GPRS/UMTS/LTE and Wi-Fi. Its novelty lies on the joint use of TV white spaces for long range radio communications, tethered balloons for lifting communications nodes high above the ocean surface, multi-hop relaying techniques for radio range extension, and standard access networks at the ocean. Simulation results prove it is possible to reach radio ranges beyond 100 km and bitrates in excess of 3 Mbit/s using a two-hop land-sea communications chain.