2018
Authors
Magalhaes, R; Silva, S; Frazao, O;
Publication
MICROWAVE AND OPTICAL TECHNOLOGY LETTERS
Abstract
The placement of an Erbium-doped Fiber Amplifier and a Fabry-Perot cavity inside a fiber ring resonator can generate a sinusoidal modulation in the optical signal obtained. The characterization of this behavior is achieved by changing the length of the Fabry-Perot cavity, which acts as a sensing device. A theoretical model of the optical signal modulation obtained with such configuration is also presented.
2018
Authors
Gomes, AD; Silveira, B; Dellith, J; Becker, M; Rothhard, M; Bartelt, H; Frazao, O;
Publication
IEEE PHOTONICS TECHNOLOGY LETTERS
Abstract
A sensing structure based on a cleaved silica microsphere is proposed for temperature sensing. The microsphere was cleaved using focused ion beam milling. The asymmetry in the structure introduced by the cut generates not only new cavities but also random interferometric reflections inside the microsphere. These two spectral components can be separated using low-pass and high-pass filters, respectively. The sensor response to temperature can be extracted from the cavities' component using a correlation method. The device achieved a temperature sensitivity of -10.8 +/- 0.2 pm/degrees C between 30 degrees C and 80 degrees C. The same effect is impossible to be obtained in a normal uncleaved microsphere. The random interferometric component did not provide any information on temperature using the same analysis. However, when changing the temperature, a new and completely distinct reflection spectrum with no apparent correlation with others at different temperatures was achieved.
2018
Authors
Oliveira, R; Roriz, P; Marques, MB; Frazao, O;
Publication
PHOTONIC SENSORS
Abstract
The purpose of the present work is to construct a reaction board based on fiber Bragg gratings (FBGs) that could be used for estimation of the 2D coordinates of the projection of center of gravity (CG) of an object. The apparatus is consisted of a rigid equilateral triangular board mounted on three supports at the vertices, two of which have cantilevers instrumented with FBGs. When an object of known weight is placed on the board, the bending strain of the cantilevers is measured by a proportional wavelength shift of the FBGs. Applying the equilibrium conditions of a rigid body and proper calibration procedures, the wavelength shift is used to estimate the vertical reaction forces and moments of force at the supports and the coordinates of the object's CG projection on the board. This method can be used on a regular basis to estimate the CG of the human body or objects with complex geometry and density distribution. An example is provided for the estimation of the CG projection coordinates of two orthopaedic femur bone models, one intact, and the other with a hip stem implant encased. The clinical implications of changing the normal CG location by means of a prosthesis have been discussed.
2018
Authors
Gomes, AD; Karami, F; Zibaii, MI; Latifi, H; Frazao, O;
Publication
IEEE Sensors Letters
Abstract
2018
Authors
Dos Santos P.S.S.; Jorge P.A.S.; De Almeida J.M.M.M.; Coelho L.;
Publication
Optics InfoBase Conference Papers
Abstract
A system with fiber laser diodes and photodetector replaces the usual bulky and expensive systems for characterization of long period fiber gratings and high correlation is achieved when measuring refractive index, temperature and curvature.
2018
Authors
Ferreira, M; Gomes, A; Kowal, D; Statkiewicz Barabach, G; Mergo, P; Frazão, O;
Publication
Fibers
Abstract
In this work, an alternative method of coupling light into microstructured polymer fibers is presented. The solution consists in using a fiber taper fabricated with a CO2 laser. The connection is formed by inserting a tapered silica tip into the holes of a microstructured polymer fiber. This alternative method is duly characterized and the feasibility of such fiber connection to enable the polymer fiber as a displacement sensor is also demonstrated. © 2018 by the authors.
The access to the final selection minute is only available to applicants.
Please check the confirmation e-mail of your application to obtain the access code.