Abstract
In this work, a Fabry-Perot optical fiber sensor for the measurement of strain at extreme temperatures is proposed. The cavity is formed by splicing a short section of a silica tube between two sections of single mode fiber. The tube, with a cladding similar to 14 mu m thick and a hollow core, presents four small rods, of similar to 20 mu m in diameter each, positioned in in diametrically opposite positions. This design ensures higher mechanical stability of the tube. Strain measurements are performed over a wide range of temperatures, until 900 degrees C. Some of the annealing effects are addressed in this study.

Abstract
This work presents a fiber-optic Cavity Ring-Down (CRD) configuration using an added-signal for curvature sensing. An Optical Time-Domain Reflectometer (OTDR) was used to send impulses down into the fiber loop cavity, inside of which a long period grating (LPG) was placed to act as sensing device. The added-signal was obtained by the sum of several conventional CRD impulses, thus providing an improvement on the curvature sensitivity when compared to the conventional CRD signal processing. Sensitivity to applied curvature of 15.3 mu s/m(-1) was obtained. This result was found to be 20-fold the one obtained for the conventional CRD signal processing.

Abstract
The wine sector is a billion euro business and therefore subjected to multiple attempts of fraudulent practices. This requires the development of rapid and reliable methods to detect such situations. Several methodologies have been developed based on the chemical profiles of the wines, but they are limited due to the environmental conditions that cannot be controlled. The use of DNA-based detection systems are an emergent research field that have been extended to a wide variety of food products and are still the most reliable methods for varietal identification. However these methods are not suitable for geographical determination. Soil related fingerprints have a primary role considering that there is a relationship between the elemental composition of wine and the composition of the provenance soil. WineBioCode is a project aiming to define the best strategy for wine authenticity based on a multidisciplinary approach. Two DNA-based strategies have been developed based on Real-time PCR and a label free optical biosensor platform. Both platforms enabled successful identification of specific DNA-targets when applied to Vitis vinifera L., and can be applied throughout the grape-wine chain. The methods are complementary and can be used in different situations, according to the requirements. The geographical evaluation has been assessed by the strontium 875r1865r isotope ratio determination involving soil evaluation in the vineyards followed by its assay in the wine samples. The results are being integrated in order to establish the best procedure to be undertaken for wine fingerprinting, including varietal composition and geographical origin, therefore fulfilling the requirements of the geographical denominations in wine certification.

Abstract
This letter presents a fiber-optic cavity ring down (CRD) configuration using an added-signal for curvature sensing. An optical time-domain reflectometer was used to send impulses down into the fiber loop cavity, inside of which a long period grating was placed to act as a sensing device. The added-signal was obtained by the sum of several conventional CRD impulses, thus providing an improvement on the curvature sensitivity when compared with the conventional CRD signal processing. A linear response to applied curvature in the range of 2.2-3.6 m(-1) was observed, and a sensitivity of 15.3 mu s/m(-1) was obtained. This result was found to be 20-fold the one obtained for the conventional CRD signal processing. The added-signal increases the optical power but increases as well the ring-down time due to the sum of the several loops that light travels inside the ring. A ring-down time response of 43.3 mu s was attained (versus 23.7 mu s for the conventional CRD signal processing).

Abstract
An erbium-doped (Er3+) fiber optic laser is proposed for sensing alternated magnetic fields by measuring the laser intensity modulation. The sensor is fabricated using two partially overlapped narrow-band fiber Bragg gratings (FBGs) and a section of doped fiber in a Fabry-Perot configuration. Laser power stability and bandwidth are studied while changing the overlap. A bulk rod of TbDyFe, a magnetostrictive material, is glued to both the FBGs and the laser wavelength and power are modulated according to the magnetic field. Acquisition and processing are done using virtual instrumentation. Results have shown the possibility of detecting 11.18 mu T-rms/root Hz for an alternating magnetic field of 4.17 mT(rms).

Abstract
In this study, a multimodal interferometer based on a suspended core photonic crystal fiber (PCF) for simultaneous strain and temperature measurements is proposed. The structure is also employed for angle measurements. The sensor comprises a 3-mm-suspended core PCF between SMFs and is based on the combination of two multimodal interferences with different frequency fringe patterns. The interferometric patterns show different sensitivity responses to strain and temperature. Through a low-pass frequency filtering of the detected spectrum, the wavelength shift of the two patterns can be measured allowing the discrimination of strain and temperature effects with resolutions of 0.45 degrees C and 4.02 mu epsilon, respectively. The sensor is also characterized for angle measurements showing a maximum sensitivity of 9.17 pm/degrees in the range from 0 degrees to 90 degrees. It is demonstrated that with this sensing structure is possible to obtain simultaneous measurement of bend angle and temperature with resolutions of 1.69 degrees and 0.92 degrees C, respectively.