Cookies Policy
The website need some cookies and similar means to function. If you permit us, we will use those means to collect data on your visits for aggregated statistics to improve our service. Find out More
Accept Reject
  • Menu
Publications

Publications by CRIIS

2021

Unravelling Plant-Pathogen Interactions: Proximal Optical Sensing as an Effective Tool for Early Detect Plant Diseases

Authors
Reis-Pereira, M; Martins, RC; Silva, AF; Tavares, F; Santos, F; Cunha, M;

Publication
Chemistry Proceedings

Abstract
This study analyzed the potential of proximal optical sensing as an effective approach for early disease detection. A compact, modular sensing system, combining direct UV–Vis spectroscopy with optical fibers, supported by a principal component analysis (PCA), was applied to evaluate the modifications promoted by the bacteria Xanthomonas euvesicatoria in tomato leaves (cv. cherry). Plant infection was achieved by spraying a bacterial suspension (108 CFU mL-1) until run-off occurred, and a similar approach was followed for the control group, where only water was applied. A total of 270 spectral measurements were performed on leaves, on five different time instances, including pre- and post-inoculation measurements. PCA was then applied to the acquired data from both healthy and inoculated leaves, which allowed their distinction and differentiation, three days after inoculation, when unhealthy plants were still asymptomatic.

2021

Visible–Near-Infrared Platelets Count: Towards Thrombocytosis Point-of-Care Diagnosis

Authors
Barroso, TG; Ribeiro, L; Gregório, H; Santos, F; Martins, RC;

Publication
Chemistry Proceedings

Abstract
Thrombocytosis is a disorder with an excessive number of platelets in the blood, where total platelet counts (TPC) are crucial for diagnosis. This condition predisposes to blood vessels clotting and diseases such as stroke or heart attack. TPC is generally performed at the laboratory by flow cytometry with laser scattering or impedance detection. Due to the limited capacity of automated hematology in performing TPC quantification, a manual microscopy count is a very common quality assurance measure undertaken by clinical pathologists. Monitoring coagulation risk is key in many health conditions, and point-of-care platforms would simplify this procedure by taking platelet counts to the bedside. Spectroscopy has high potential for reagent-less point-of-care miniaturized technologies. However, platelets are difficult to detect in blood by standard spectroscopy analysis, due to their small size, low number when compared to red blood cells, and low spectral contrast to hemoglobin. In this exploratory research, we show that it is possible to perform TPC by advanced spectroscopy analysis, using a new processing methodology based on self-learning artificial intelligence. The results show that TPC can be measured by visible–near-infrared spectroscopy above the standard error limit of 61.19 × 109 cells/L (R2 = 0.7016), tested within the data range of 53 × 109 to 860 × 109 cells/L of dog blood. These results open the possibility for using spectroscopy as a diagnostic technology for the detection of high levels of platelets directly in whole blood, towards the rapid diagnosis of thrombocytosis and stroke prevention.

2021

Feasibility of Total White Blood Cells Counts by Visible-Near Infrared Spectroscopy

Authors
Barroso, TG; Ribeiro, L; Gregório, H; Santos, F; Martins, RC;

Publication
Chemistry Proceedings

Abstract
Total white blood cells (WBC) count is an important indication for infection diagnosis, in both human and veterinary medicine. State-of-the-art WBC counts are performed by flow cytometry combined with light scattering or impedance measurements, in the clinical analysis laboratory. These technologies are complex and difficult to be miniaturized into a portable point-of-care (POC) system. Spectroscopy is one of the most powerful technologies for POC miniaturization due to its capacity to analyze low sample quantities, little to no sample preparation, and ‘real-time’ results. WBC is in the proportion of 1:1000 to red blood cells (RBC), and the latter dominate visible-near infrared (Vis-NIR) information due to their large quantities and hemoglobin absorbance. WBC are difficult to be detected by traditional spectral analysis because their information is contained within the interference of hemoglobin bands. Herein, we perform a feasibility study for the direct detection of WBC counts in canine blood by Vis-NIR spectroscopy for veterinary applications, benchmarking current chemometrics techniques with self-learning artificial intelligence—a new advanced method for high-accuracy quantification from spectral information. Results show that total WBC counts can be detected by Vis-NIR spectroscopy to an average detection limit of 7.8 ×109 cells/L, with an R2 of 0.9880 between impedance flow cytometry analysis and spectral quantification. This result opens new possibilities for reagent-less POC technology in infection diagnosis. As WBC counts in dogs range from 5 to 45 ×109 cells/L, the detection limit obtained in this research allows concluding that the combined use of spectroscopy with this SL-AI new algorithm is a step towards the existence of portable and miniaturized Spectral POC hemogram analysis.

2021

The MopBot Cleaning Robot - An EPS@ISEP 2020 Project

Authors
Tuluc, C; Verberne, F; Lasota, S; de Almeida, T; Malheiro, B; Justo, J; Ribeiro, C; Silva, MF; Ferreira, P; Guedes, P;

Publication
EDUCATING ENGINEERS FOR FUTURE INDUSTRIAL REVOLUTIONS, ICL2020, VOL 1

Abstract
Waste is one of the biggest problems on Earth today. In the spring of 2020, a team of students enrolled in the European Project Semester at Instituto Superior de Engenharia decided to contribute with the design of an ethically and sustainability-oriented autonomous cleaning robot named MopBot. The project started with the research on similar solutions, ethics, marketing and sustainability to define a concept and create a functional, ethical and sustainability driven design, including the complete control system. Finally, given the undergoing pandemic, the operation of the MopBot was simulated using CoppeliaSim. MopBot is a medium-sized vacuum cleaner, with two vertical brushes, intended to clean autonomously large areas inside buildings such as shopping malls or corridors. It is shipped with a sustainable packaging solution which can be re-purposed as a disposal box for electrical components.

2021

Design, Modeling, and Simulation of a Wing Sail Land Yacht

Authors
Tinoco, V; Malheiro, B; Silva, MF;

Publication
APPLIED SCIENCES-BASEL

Abstract
Featured Application This work describes the design, modeling, and simulation of a free-rotating wing sail solution for an autonomous environmental land yacht probe. The adopted method involves the application of land sailing principles for the design, the usage of Fusion 360 tool for 3D modeling, and the integration of Gazebo with the Robotic Operating System (ROS) framework for the simulation of the land yacht. Autonomous land yachts can play a major role in the context of environmental monitoring, namely, in open, flat, windy regions, such as iced planes or sandy shorelines. This work addresses the design, modeling, and simulation of a land yacht probe equipped with a rigid free-rotating wing sail and tail flap. The wing was designed with a symmetrical airfoil and dimensions to provide the necessary thrust to displace the vehicle. Specifically, it proposes a novel design and simulation method for free rotating wing sail autonomous land yachts. The simulation relies on the Gazebo simulator together with the Robotic Operating System (ROS) middleware. It uses a modified Gazebo aerodynamics plugin to generate the lift and drag forces and the yawing moment, two newly created plugins, one to act as a wind sensor and the other to set the wing flap angular position, and the 3D model of the land yacht created with Fusion 360. The wing sail aligns automatically to the wind direction and can be set to any given angle of attack, stabilizing after a few seconds. Finally, the obtained polar diagram characterizes the expected sailing performance of the land yacht. The described method can be adopted to evaluate different wing sail configurations, as well as control techniques, for autonomous land yachts.

2021

Smart Bicycle Probe - An EPS@ISEP 2020 Project

Authors
Boularas, M; Szmytke, Z; Smith, L; Isik, K; Ruusunen, J; Malheiro, B; Justo, J; Ribeiro, C; Silva, MF; Ferreira, P; Guedes, P;

Publication
EDUCATING ENGINEERS FOR FUTURE INDUSTRIAL REVOLUTIONS, ICL2020, VOL 1

Abstract
Air pollution kills approximately 7 million people every year and nine out of ten people are exposed to high levels of airborne pollutants. This paper describes the design of a bicycle air probe by a team of multicultural and multidisciplinary students of the European Project Semester, during the spring of 2020. This learning experience started with the analysis of the state-of-the-art, ethics, marketing and sustainability dimensions, and was followed by the design, development and simulation of a proof-of-concept solution. The result is GOairLight - a bicycle probe paired with a mobile app. The probe collects air quality, humidity and temperature data as cyclists ride, while the mobile app shares the collected data with the community, by means of a cloud database, presents relevant air quality information and suggests less polluted routes. Furthermore, it relies on a sustainable energy source - a dynamo powered by the cyclist - and automatic lighting. The latter feature improves cyclist visibility and raises the awareness towards the cyclist, contributing to increased road safety.

  • 73
  • 330