Abstract
This paper addresses Three-Dimensional (3D) reconstruction of historical sites with an Unmanned Aerial Vehicle (UAV), combining the information from a visible spectrum camera with a Light Detection and Ranging (LiDAR). The developed solution was validated in two sites located in Monastery of Tibães (Braga, NW Portugal), within the scope of MineHeritage project, which intends to reach society on the importance of raw materials through a historical approach. The outputs obtained from the datasets, resulted in a successfully 3D reconstruction of the two studied sites on the Monastery. Although the research is still ongoing on this topic, this paper is a starting point and an important contribution to this field and this type of scenarios. © CLAWAR Association Ltd.

Abstract

Abstract
Offshore wind farms are becoming the main alternative to fossil fuels and the future key to mitigating climate change by achieving energy sustainability. With favorable indicators in almost every environmental index, these structures operate under varying and dynamic environmental conditions, leading to efficiency losses and sudden failures. For these reasons, it's fundamental to promote the development of autonomous solutions to monitor the health condition of the construction parts, preventing structural damage and accidents. This paper introduces a new simulation environment for testing and training autonomous inspection techniques under a more realistic offshore wind farm scenario. Combining the Gazebo simulator with ROS, this framework can include multi-robots with different sensors to operate in a customizable simulation environment regarding some external elements (fog, wind, buoyancy...). The paper also presents a use case composed of a 3D LiDAR-based technique for autonomous wind turbine inspection with UAV, including point cloud clustering, model estimation, and the preliminary results under this simulation framework using a mixed environment (offshore simulation with a real UAV platform).

Abstract

Abstract
The deployment of offshore wind turbines (WTs) has emerged as a pivotal strategy in the transition to renewable energy, offering significant potential for clean electricity generation. However, these structures' operation and maintenance (O&M) present unique challenges due to their remote locations and harsh marine environments. For these reasons, it is fundamental to promote the development of autonomous solutions to monitor the health condition of the construction parts, preventing structural damage and accidents. This paper explores the application of Unmanned Aerial Vehicles (UAVs) in the inspection and maintenance of offshore wind turbines, introducing a new strategy for autonomous wind turbine inspection and a simulation environment for testing and training autonomous inspection techniques under a more realistic offshore scenario. Instead of relying on visual information to detect the WT parts during the inspection, this method proposes a three-dimensional (3D) light detection and ranging (LiDAR) method that estimates the wind turbine pose (position, orientation, and blade configuration) and autonomously controls the UAV for a close inspection maneuver. The first tests were carried out mainly in a simulation framework, combining different WT poses, including different orientations, blade positions, and wind turbine movements, and finally, a mixed reality test, where a real vehicle performed a full inspection of a virtual wind turbine.