Detalhes
Nome
António José OliveiraCargo
Assistente de InvestigaçãoDesde
10 setembro 2020
Nacionalidade
PortugalCentro
Centro de Robótica e Sistemas AutónomosContactos
+351222094000
antonio.j.oliveira@inesctec.pt
2024
Autores
Oliveira, AJ; Ferreira, BM; Cruz, NA; Diamant, R;
Publicação
IEEE TRANSACTIONS ON MOBILE COMPUTING
Abstract
The calibration of sensors stationed along a cable in marine observatories is a time-consuming and expensive operation that involves taking the mooring out of the water periodically. In this paper, we present a method that allows an underwater vehicle to approach a mooring, in order to take reference measurements along the cable for in-situ sensor calibration. We use the vehicle's Mechanically Scanned Imaging Sonar (MSIS) to identify the cable's reflection within the sonar image. After pre-processing the image to remove noise, enhance contour lines, and perform smoothing, we employ three detection steps: 1) selection of regions of interest that fit the cable's reflection pattern, 2) template matching, and 3) a track-before-detect scheme that utilized the vehicle's motion. The later involves building a lattice of template matching responses for a sequence of sonar images, and using the Viterbi algorithm to find the most probable sequence of cable locations that fits the maximum speed assumed for the surveying vessel. Performance is explored in pool and sea trials, and involves an MSIS onboard an underwater vehicle scanning its surrounding to identify a steel-core cable. The results show a sub-meter accuracy in the multi-reverberant pool environment and in the sea trial. For reproducibility, we share our implementation code.
2024
Autores
Oliveira, AJ; Ferreira, BM; Cruz, NA;
Publicação
2024 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION (ICRA 2024)
Abstract
Lack of information and perceptual ambiguity are key problems in sonar-based mapping applications. We propose a technique for mapping of underwater environments, building on the finite, positive, sonar beamwidth. Our approach models the free-space covered by each emitted acoustic pulse, employing volumetric techniques to create grid-based submaps of the unoccupied water volumes through images collected from imaging sonars. A representation of the occupied space is obtained by exploration of the free-space frontier. Special attention is given to acoustic image preparation and segmentation. Experimental results are provided based on real data collected from a dam shaft scenario.
2023
Autores
Oliveira, AJ; Ferreira, BM; Cruz, NA;
Publicação
OCEANS 2023 - LIMERICK
Abstract
Blob features are particularly common in acoustic imagery, as isolated objects (e.g., moorings, mines, rocks) appear as blobs in the acquired images. This work focuses the application of the SIFT, SURF, KAZE and U-SURF feature extraction algorithms for blob feature tracking towards Simultaneous Localization and Mapping applications. We introduce a modified feature extraction and matching pipeline intended to improve feature detection and matching precision, tackling performance deterioration caused by the differences between optical and acoustic imagery. Experimental evaluation was undertaken resorting to datasets collected from a water tank structure.
2022
Autores
Oliveira, AJ; Ferreira, BM; Diamant, R; Cruz, NA;
Publicação
2022 IEEE/OES AUTONOMOUS UNDERWATER VEHICLES SYMPOSIUM (AUV)
Abstract
In-situ calibration of marine sensors requires close-range positioning. In turn, localization relative to a given object of interest is necessary. This paper deals with the detection of a vertical cable hanging from a marine observatory implemented by means of a moored buoy. An algorithm composed of sequential image filtering, segmentation and template matching is proposed. Two approaches for generating the cable's acoustic image template are introduced. The performance of the approaches, obtained by comparison with ground-truth measurements, are illustrated over challenging cluttered acoustic images collected in a test tank. The results indicate a performance better than 74% of the best candidate to match the actual cable.
2022
Autores
Oliveira, AJ; Ferreira, BM; Cruz, NA;
Publicação
2022 OCEANS HAMPTON ROADS
Abstract
Wall and other planar structures are common in environments as harbors, marinas, or dams. In this paper we introduce an algorithm aimed at the identification of these structures through acoustic images retrieved from an imaging sonar, building on an application of the Hough Transform algorithm. We employ a polar-based line parametric model for improved computational efficiency and further adapt the core Hough Transform blocks to the characteristics of acoustic imaging. The developed solution was subjected to experimental tests employing acoustic data acquired in a water tank, from different viewpoints and under different sonar gain configurations.
The access to the final selection minute is only available to applicants.
Please check the confirmation e-mail of your application to obtain the access code.