Cookies
O website necessita de alguns cookies e outros recursos semelhantes para funcionar. Caso o permita, o INESC TEC irá utilizar cookies para recolher dados sobre as suas visitas, contribuindo, assim, para estatísticas agregadas que permitem melhorar o nosso serviço. Ver mais
Aceitar Rejeitar
  • Menu
Publicações

Publicações por CSE

2023

Adding Records to Alloy

Autores
Brunel, J; Chemouil, D; Cunha, A; Macedo, N;

Publicação
RIGOROUS STATE-BASED METHODS, ABZ 2023

Abstract
Records are a composite data type available in most programming and specification languages, but they are not natively supported by Alloy. As a consequence, users often find themselves having to simulate records in ad hoc ways, a strategy that is error prone and often encumbers the analysis procedures. This paper proposes a conservative extension to the Alloy language to support record signatures. Uniqueness and completeness is imposed on the atoms of such signatures, while still supporting Alloy's flexible signature hierarchy. The Analyzer has been extended to internally expand such record signatures as partial knowledge for the solving procedure. Evaluation shows that the proposed approach is more efficient than commonly used idioms.

2023

Procedural Point Cloud Modelling in Scan-to-BIM and Scan-vs-BIM Applications: A Review

Autores
Abreu, N; Pinto, A; Matos, A; Pires, M;

Publicação
ISPRS INTERNATIONAL JOURNAL OF GEO-INFORMATION

Abstract
Point cloud processing is an essential task in many applications in the AEC domain, such as automated progress assessment, quality control and 3D reconstruction. As much of the procedure used to process the point clouds is shared among these applications, we identify common processing steps and analyse relevant algorithms found in the literature published in the last 5 years. We start by describing current efforts on both progress and quality monitoring and their particular requirements. Then, in the context of those applications, we dive into the specific procedures related to processing point clouds acquired using laser scanners. An emphasis is given to the scan planning process, as it can greatly influence the data collection process and the quality of the data. The data collection phase is discussed, focusing on point cloud data acquired by laser scanning. Its operating mode is explained and the factors that influence its performance are detailed. Data preprocessing methodologies are presented, aiming to introduce techniques used in the literature to, among other aspects, increase the registration performance by identifying and removing redundant data. Geometry extraction techniques are described, concerning both interior and outdoor reconstruction, as well as currently used relationship representation structures. In the end, we identify certain gaps in the literature that may constitute interesting topics for future research. Based on this review, it is evident that a key limitation associated with both Scan-to-BIM and Scan-vs-BIM algorithms is handling missing data due to occlusion, which can be reduced by multi-platform sensor fusion and efficient scan planning. Another limitation is the lack of consideration for laser scanner performance characteristics when planning the scanning operation and the apparent disconnection between the planning and data collection stages. Furthermore, the lack of representative benchmark datasets is hindering proper comparison of Scan-to-BIM and Scan-vs-BIM techniques, as well as the integration of state-of-the-art deep-learning methods that can give a positive contribution in scene interpretation and modelling.

2023

An Exploratory Study about the Effect of COVID-19 on the Intention to Adopt Virtual Reality in the Tourism Sector

Autores
Sousa, N; Jorge, F; Teixeira, MS; Losada, N; Melo, M; Bessa, M;

Publicação
SUSTAINABILITY

Abstract
During the health crisis caused by COVID-19, virtual reality (VR) proved to be useful for the tourism industry, allowing this industry to continue working despite the restrictions imposed. However, it remains to be seen if the impact of this sanitary crisis in the tourism industry influenced managers' intention to adopt this technology in the post-pandemic period. To fill this gap, a qualitative methodological approach was adopted, using the MAXQDA20 software and interviews with managers of tourism enterprises. The results show that the willingness to invest in technology, the perception of VR as a business strategy, and the perception of the impact of the pandemic are factors that regulate the intention of companies to adopt VR. In addition, prior experience with VR and the perception of technical support are also important for its adoption. Thus, it was concluded that VR can be a valuable sustainable strategy for tourism companies to address the challenges imposed by the pandemic. However, adopting the technology depends on factors such as financial availability, business strategy, and previous experience with VR. Furthermore, tourism companies must also receive adequate technical support to ensure its correct implementation.

2023

Efficient Embedding of Strategic Attribute Grammars via Memoization

Autores
Macedo, JN; Rodrigues, E; Viera, M; Saraiva, J;

Publicação
Proceedings of the 2023 ACM SIGPLAN International Workshop on Partial Evaluation and Program Manipulation, PEPM 2023, Boston, MA, USA, January 16-17, 2023

Abstract
Strategic term re-writing and attribute grammars are two powerful programming techniques widely used in language engineering. The former relies on strategies to apply term re-write rules in defining large-scale language transformations, while the latter is suitable to express context-dependent language processing algorithms. These two techniques can be expressed and combined via a powerful navigation abstraction: generic zippers. This results in a concise zipper-based embedding offering the expressiveness of both techniques. Such elegant embedding has a severe limitation since it recomputes attribute values. This paper presents a proper and efficient embedding of both techniques. First, attribute values are memoized in the zipper data structure, thus avoiding their re-computation. Moreover, strategic zipper based functions are adapted to access such memoized values. We have implemented our memoized embedding as the Ztrategic library and we benchmarked it against the state-of-the-art Strafunski and Kiama libraries. Our first results show that we are competitive against those two well established libraries. © 2023 ACM.

2023

Labelled Indoor Point Cloud Dataset for BIM Related Applications

Autores
Abreu, N; Souza, R; Pinto, A; Matos, A; Pires, M;

Publicação
DATA

Abstract
BIM (building information modelling) has gained wider acceptance in the AEC (architecture, engineering, and construction) industry. Conversion from 3D point cloud data to vector BIM data remains a challenging and labour-intensive process, but particularly relevant during various stages of a project lifecycle. While the challenges associated with processing very large 3D point cloud datasets are widely known, there is a pressing need for intelligent geometric feature extraction and reconstruction algorithms for automated point cloud processing. Compared to outdoor scene reconstruction, indoor scenes are challenging since they usually contain high amounts of clutter. This dataset comprises the indoor point cloud obtained by scanning four different rooms (including a hallway): two office workspaces, a workshop, and a laboratory including a water tank. The scanned space is located at the Electrical and Computer Engineering department of the Faculty of Engineering of the University of Porto. The dataset is fully labelled, containing major structural elements like walls, floor, ceiling, windows, and doors, as well as furniture, movable objects, clutter, and scanning noise. The dataset also contains an as-built BIM that can be used as a reference, making it suitable for being used in Scan-to-BIM and Scan-vs-BIM applications. For demonstration purposes, a Scan-vs-BIM change detection application is described, detailing each of the main data processing steps. Dataset: https://doi.org/10.5281/zenodo.7948116 Dataset License: Creative Commons Attribution 4.0 International License (CC BY 4.0).

2023

Taming Metadata-intensive HPC Jobs Through Dynamic, Application-agnostic QoS Control

Autores
Macedo, R; Miranda, M; Tanimura, Y; Haga, J; Ruhela, A; Harrell, SL; Evans, RT; Pereira, J; Paulo, J;

Publicação
2023 IEEE/ACM 23RD INTERNATIONAL SYMPOSIUM ON CLUSTER, CLOUD AND INTERNET COMPUTING, CCGRID

Abstract
Modern I/O applications that run on HPC infrastructures are increasingly becoming read and metadata intensive. However, having multiple applications submitting large amounts of metadata operations can easily saturate the shared parallel file system's metadata resources, leading to overall performance degradation and I/O unfairness. We present PADLL, an application and file system agnostic storage middleware that enables QoS control of data and metadata workflows in HPC storage systems. It adopts ideas from Software-Defined Storage, building data plane stages that mediate and rate limit POSIX requests submitted to the shared file system, and a control plane that holistically coordinates how all I/O workflows are handled. We demonstrate its performance and feasibility under multiple QoS policies using synthetic benchmarks, real-world applications, and traces collected from a production file system. Results show that PADLL can enforce complex storage QoS policies over concurrent metadata-aggressive jobs, ensuring fairness and prioritization.

  • 7
  • 218