Maria Silva Lopes

Abstract
Quadruped robots have gained significant attention in the robotics world due to their capability to traverse unstructured terrains, making them advantageous in search and rescue and surveillance operations. However, their utility is substantially restricted in situations where object manipulation is necessary. A potential solution is to integrate a robotic arm, although this can be challenging since the arm's addition may unbalance the whole system, affecting the quadruped locomotion. To address this issue, the robotic arm must be adapted to the quadruped robot, which is not viable with commercially available products. This paper details the design and development of a robotic arm that has been specifically built to integrate with a quadruped robot to use in a variety of agricultural and industrial applications. The design of the arm, including its physical model and kinematic configuration, is presented. To assess the effectiveness of the prototype, a simulation was conducted with a motion-planning algorithm based on the arm's inverse kinematics. The simulation results confirm the system's stability and the functionality of the robotic arm's movement.

Abstract
Robotic competitions stand as platforms to propel the forefront of robotics research while nurturing STEM education, serving as hubs of both applied research and scientific innovation. In Portugal, the Portuguese Robotics Open (FNR) is an event with several robotic competitions, including the Robot@Factory 4.0 competition. This competition presents an example of deploying autonomous robots on a factory shop floor. Although the literature has works proposing frameworks for the original version of the Robot@Factory competition, none of them proposes a system framework for the Robot@Factory 4.0 version that presents the hardware, firmware, and software to complete the competition and achieve autonomous navigation. This paper proposes a complete robotic framework for the Robot@Factory 4.0 competition that is modular and open-access, enabling future participants to use and improve it in future editions. This work is the culmination of all the knowledge acquired by winning the 2022 and 2023 editions of the competition.

Abstract
The advancement of technology has led to a growing demand for autonomy across various sectors. A key aspect of achieving autonomous navigation through intricate environments is path planning, initially confined to 2D spaces but rapidly evolving to address the complexities of 3D environments. Despite the widespread adoption of RRT-based planners, their inherent lack of optimality has encouraged researchers to find refinements. This paper transposes an existing algorithm developed for 2D environments to 3D, leveraging a heuristic to optimize the generated paths in terms of path length, memory consumed, and execution time. Along with this scalability to 3D scenarios, a modification was introduced that trades off some execution time for a substantial improvement in path length. The results obtained from a series of simulated experimental tests prove the efficacy of the proposed method in 3D environments, demonstrating reduced memory consumption and execution time compared to conventional approaches.

Abstract
Quadruped robots are gaining attention in the research community because of their superior mobility and versatility in a wide range of applications. However, they are restricted to procedures that do not need precise object interaction. With the addition of a robotic arm, they can overcome these drawbacks and be used in a new set of tasks. Combining a legged robot's dextrous movement with a robotic arm's maneuverability allows the emergence of a highly flexible system, but with the disadvantage of higher complexity of motion planning and control methods. This paper gives an overview of the existing quadruped systems capable of manipulation, with a particular interest in systems with high movement flexibility. The main topics discussed are the motion planning approaches and the selected kinematic configuration. This review concludes that the most followed research path is to add a robotic arm on the quadrupedal base and that the motion planning approach used depends on the desired application. For simple tasks, the arm can be seen as an independent system, which is simpler to implement. For more complex jobs the coupling effects between the arm and quadruped robot must be considered.