Abstract
The aim of this study was to assess the antimicrobial effects of myrtle (Myrtus communis L.) essential oil (EO) on pathogenic (E. coli O157:H7 NCTC 12900; Listeria monocytogenes ATCC BAA-679) and spoilage microbiota in beef and determine its minimum inhibitory concentration (MIC) and antioxidant activity. The behavior of LAB, Enterobacteriaceae, Pseudomonas spp., and fungi, as well as total mesophilic (TM) and total psychotropic (TP) counts, in beef samples, was analyzed during storage at 2 and 8 C-degrees in two different packaging systems (aerobiosis and vacuum). Leaves of myrtle were dried, its EO was extracted by hydrodistillation using a Clevenger-type apparatus, and the chemical composition was determined using chromatographical techniques. The major compounds obtained were myrtenyl acetate (15.5%), beta-linalool (12.3%), 1,8-cineole (eucalyptol; 9.9%), geranyl acetate (7.4%), limonene (6.2%), alpha-pinene (4.4%), linalyl o-aminobenzoate (5.8%), alpha-terpineol (2.7%), and myrtenol (1.2%). Myrtle EO presented a MIC of 25 mu L/mL for E. coli O157:H7 NCTC 12900, E. coli, Listeria monocytogenes ATCC BAA-679, Enterobacteriaceae, and E. coli O157:H7 ATCC 35150 and 50 mu L/mL for Pseudomonas spp. The samples packed in aerobiosis had higher counts of deteriorative microorganisms than samples packed under vacuum, and samples with myrtle EO presented the lowest microbial contents, indicating good antimicrobial activity in beef samples. Myrtle EO is a viable natural alternative to eliminate or reduce the pathogenic and deteriorative microorganisms of meat, preventing their growth and enhancing meat safety.

Abstract
Portable X-Ray Fluorescence (XRF) has become increasingly popular where traditional laboratory methods are either impractical, time consuming, and/or too costly. While the Limit of Detection (LOD) is generally poorer for XRF compared to laboratory-based methods, recent advances have improved XRF LODs and increased its potential for field-based studies. Portable XRF can be used to screen food products for toxic elements such as lead (Pb), cadmium (Cd), mercury (Hg), arsenic (As), manganese, (Mn), zinc (Zn), and strontium (Sr). In this study, 23 seafood samples were analyzed using portable XRF in a home setting. After XRF measurements were completed in each home, the same samples were transferred to the laboratory for re-analysis using microwave-assisted digestion and Inductively Coupled Plasma Tandem Mass Spectrometry (ICP-MS/MS). Four elements (Mn, Sr, As, and Zn) were quantifiable by XRF in most samples, and those results were compared to those obtained by ICP-MS/MS. Agreement was judged reasonable for Mn, Sr, and As, but not for Zn. Discrepancies could be due to (1) the limited time available to prepare field samples for XRF, (2) the heterogeneous nature of real samples analyzed by XRF, and (3) the small beam spot size (similar to 1 mm) of the XRF analyzer. Portable XRF is a cost-effective screening tool for public health investigations involving exposure to toxic metals. It is important for practitioners untrained in XRF spectrometry to (1) recognize the limitations of portable instrumentation, (2) include validation data for each specific analyte(s) measured, and (3) ensure personnel have some training in sample preparation techniques for field-based XRF analyses.

Abstract

Abstract
In this work, an optical fiber flowmeter based on a Michelson interferometer is presented. The Michelson interferometer uses a long period fiber grating (LPFG) to couple light to the cladding modes followed by a section of a GO-coated single mode fiber (SMF). By radiating the GO thin film, it will increase its temperature changing the effective refractive index of the optical cavity of the Michelson interferometer. By placing the sensor on a gas flow, its temperature surface will decrease in a proportional manner to the flow rate. The sensor was studied in both static and dynamic dry nitrogen flow, attaining an absolute sensitivity of 17.4 ± 0.8 pm/(L.min-1) and a maximum response time of 1.1 ± 0.4 s.

Abstract
White Light Interferometry, known for its absolute measurement capability and high precision, had its greatest scientific impact towards the end of the 20th century. In this work, it was assembled and characterized a fibre Mach-Zehnder interferometer (MZI) as an interrogator and a fibre Fabry-Perot interferometer (FPI) as a displacement sensor. A measurement bandwidth between 65 µm and 95 µm was obtained for FPI cavities close to 2.35 mm, at sampling frequencies between 600 Hz and 1500 Hz. Additionally, a resonant frequency at 550 Hz was achieved, allowing for an interrogation band higher than 135 µm. It was also determined a minimum absolute resolution of ± 66 nm, corresponding to a relative resolution of ± 9.4×10-4 in relation to the total band.

Abstract
This work presents an interrogator system based on an erbium-doped fiber ring cavity for refractive-index measurements. This fiber ring cavity is assisted by a fiber Bragg grating and a phase-shift fiber Bragg grating, both with a similar central emission wavelength to increase the output power levels.