Cookies
O website necessita de alguns cookies e outros recursos semelhantes para funcionar. Caso o permita, o INESC TEC irá utilizar cookies para recolher dados sobre as suas visitas, contribuindo, assim, para estatísticas agregadas que permitem melhorar o nosso serviço. Ver mais
Aceitar Rejeitar
  • Menu
Publicações

Publicações por Jorge Correia Pereira

2011

Advanced control and management functionalities for multi-microgrids

Autores
Madureira, AG; Pereira, JC; Gil, NJ; Pecas Lopes, JAP; Korres, GN; Hatziargyriou, ND;

Publicação
EUROPEAN TRANSACTIONS ON ELECTRICAL POWER

Abstract
This paper addresses the extension of the microgrid concept, following a massive integration of these active cells in power distribution networks, by adopting a coordinated management strategy together with distributed generation units directly connected to the medium voltage distribution network. In order to achieve this, a technical and commercial management scheme must be developed for coordinated control of a distribution system with multi-microgrids, which should take into account the specific technical capabilities and characteristics of each type of generating source. In particular, tools for coordinated voltage support and frequency control, as well as for state estimation have been developed for this type of network. Concerning voltage support, a new methodology exploiting an optimization tool based on a meta-heuristic approach was developed. For state estimation, two approaches were considered: multi-microgrid state estimation and fuzzy state estimation. Regarding frequency control, the hierarchical structure of the multi-microgrid is exploited to deal with the transition to islanded operation and load following in islanded operation. All these tools have proved to be efficient in managing the multi-microgrid system in normal interconnected mode and, in case of the frequency control, in islanded operation. Copyright (C) 2010 John Wiley & Sons, Ltd.

2007

Distribution optimal power flow

Autores
Khodr, HM; Matos, MA; Pereira, J;

Publicação
2007 IEEE LAUSANNE POWERTECH, VOLS 1-5

Abstract
This paper presents a new and efficient methodology for network reconfiguration with optimal power flow based on Benders Decomposition approach. The objective minimizes the power losses, balancing load among the feeders and subject to the constraints: capacity limit of the branches, minimal and maximal limits of the substation or generator, minimum deviation of the nodes voltages and radial operation of the networks. A variant of the generalized Benders decomposition algorithm is applied for solving the problem, since the formulation can be embedded under two stages. The first one is the Master problem and Is formulated as Mixed Integer non-Linear Programming. This stage determines the radial topology of the distribution network. The second stage is the Slave problem and is formulated as a non-Linear Programming problem. This stage is used to determine the feasibility of the Master problem solution by means of an Optimal Power Flow and provides information to formulate the linear Benders cuts. The model is programmed in GAMS mathematical modeling language. The effectiveness of the proposal is demonstrated through an example extracted from the specialized literature.

2009

Distribution Systems Reconfiguration Based on OPF Using Benders Decomposition

Autores
Khodr, HM; Martinez Crespo, J; Matos, MA; Pereira, J;

Publicação
IEEE TRANSACTIONS ON POWER DELIVERY

Abstract
This paper presents a new and efficient methodology for distribution network reconfiguration integrated with optimal power flow (OPF) based on a Benders decomposition approach. The objective minimizes power losses, load balancing among feeders, and is subject to constraints: capacity limit of branches, minimum and maximum power limits of substations or distributed generators, minimum deviation of bus voltages, and radial optimal operation of networks. A specific approach of the Generalized Benders decomposition algorithm is applied to solve the problem. The formulation can be embedded under two stages: the first one is the Master problem and is formulated as a mixed integer nonlinear programming problem. This stage determines the radial topology of the distribution network. The second stage is the Slave problem and is formulated as a nonlinear programming problem. This stage is used to determine the feasibility of the Master problem solution by means of an OPF and provides information to formulate the linear Benders cuts that connect both problems. The model is programmed in the General Algebraic Modeling System. The effectiveness of the proposal is demonstrated through three examples extracted from the literature.

2008

A meta-heuristic approach to the unit commitment problem under network constraints

Autores
Pereira, J; Viana, A; Lucus, BG; Matos, M;

Publicação
International Journal of Energy Sector Management

Abstract
Purpose - The purpose of this paper is to solve the problem of committing electric power generators (unit commitment, UC), considering network constraints. Design/methodology/approach - The UC is first solved with a local search based meta-heuristic, following the assumption that all generators and loads are connected to a single network node. For evaluation purposes, the economical production levels of the units committed are computed by running a pre-dispatch algorithm where network constraints are not included. If a good quality solution is reached, an economic dispatch (ED) with network constraints is performed, where the geographic location of generators and loads are considered. Therefore, the production level of each committed generator is performed that leads to the global lowest solution cost, regarding both the generators' costs and constraints and the power system network constraints. Findings - The algorithm proposed is computationally efficient, given the time available for decision making. In addition, the solution for this algorithm, in terms of minimization of total costs, is generally better than the solution of the two phases approach. Some contractual and legal aspects related with the injection in network connections can also be included in the model. Practical implications - UC with network constraints has a large potential of use, especially for small and medium size power systems. It reflects reality in a closer way and provides a more complete and realistic knowledge about the system in operation. Originality/value - The paper presents an approach where theED with network constraints is integrated with the UC procedure. The model described is currently implemented in an EMS package offered in the market - making it a case of successful transfer from science to industry.

2001

Comparison of approaches to identify topology errors in the scope of state estimation studies

Autores
Pereira, JC; Saraiva, JT; Miranda, V; Costa, AS; Lourenco, EM; Clements, KA;

Publicação
2001 IEEE Porto Power Tech Proceedings

Abstract
In this paper we describe two approaches developed by two research teams to address the topology identification problem in the scope of state estimation. Both approaches aim at enlarging the traditional concept of strict state estimation, assuming that the network topology is pre-determined and is fixed. In fact, we are generalizing state estimation, enlarging its domain and aiming at obtaining topology information from a state estimation run. Apart from the description of those two techniques, the paper includes a'set of tests performed over the same test system in order to illustrate the interest of the approaches and to evaluate their performances. © 2001 IEEE.

2007

An improved fuzzy inference system for Voltage/VAR control

Autores
Miranda, V; Moreira, A; Pereira, J;

Publicação
IEEE TRANSACTIONS ON POWER SYSTEMS

Abstract
This paper describes the concept of a voltage/NAR controller based on an interaction of fuzzy Mamdani controllers, with the main objective of keeping voltages at all busbars inside an admissible band while avoiding line flows to exceed admissible limits. Estimation of sensitivities via fuzzy clustering of load profiles is proposed. A complex rule base interacts with a Newton-Raphson power flow routine in iterative steps until a terminating criterion is met, following a basic min-max approach. Tests to the method reveal it as one order of magnitude faster than a competing simulated annealing routine.

  • 6
  • 8