Abstract
A dynamic dispersion compensation device using a chirped fibre Bragg grating with a ring geometry embedded in a composite laminated is proposed. A numerical model is presented and compared with the experimental setup. It is shown that the theoretical and experimental results are in good agreement. The tunability of the device is obtained by applying different radius of curvature to the ring structure, and thus producing non-linear variations in the spatial period of the chirped fibre Bragg grating, without changing the usable bandwidth.

Abstract
An intensity-referenced temperature-independent curvature measurement technique using a smart composite comprising two chirped fiber Bragg gratings is demonstrated. The two gratings are embedded on opposite sides of a composite laminate and act simultaneously as curvature sensors and as wavelength discriminators, enabling an unambiguous measurement of the composite radius of curvature.

Abstract
A new sensing configuration is proposed for simultaneous measurement of strain and temperature that relies on a single long period grating written by the electric arc technique. The underlying principle is the azimuthal asymmetry induced by the electric arc fabrication technique, which results in a device with polarization dependent insertion loss sensitive to both temperature and strain. With the proposed configuration, resolutions of +/- 2.8 degreesC/rootHz and +/- 13.9 muepsilon/rootHz are obtained for temperature and strain measurements, respectively.

Abstract
The radiation emitted by an optical fiber during heating due to an electric arc discharge was detected using a Cronin spectrometer. The fitting of the emission spectrum to the blackbody radiation, allowed the estimation of the temperature range attained by the fiber.

Abstract
A multiplexer/demultiplexer for 100 GHz channel spacing based on chirped fibre Bragg gratings with different bandwidths and optical circulators is presented. The spectral characteristics, specifications and operation of these passive devices are described, showing its potential use in DWDM applications.

Abstract