Abstract
Purpose The motivation for robotics research in the agricultural field has sparked in consequence of the increasing world population and decreasing agricultural labor availability. This paper aims to analyze the state of the art of pruning and harvesting manipulators used in agriculture. Design/methodology/approach A research was performed on papers that corresponded to specific keywords. Ten papers were selected based on a set of attributes that made them adequate for review. Findings The pruning manipulators were used in two different scenarios: grapevines and apple trees. These manipulators showed that a light-controlled environment could reduce visual errors and that prismatic joints on the manipulator are advantageous to obtain a higher reach. The harvesting manipulators were used for three types of fruits: strawberries, tomatoes and apples. These manipulators revealed that different kinematic configurations are required for different kinds of end-effectors, as some of these tools only require movement in the horizontal axis and others are required to reach the target with a broad range of orientations. Originality/value This work serves to reduce the gap in the literature regarding agricultural manipulators and will support new developments of novel solutions related to agricultural robotic grasping and manipulation.

Abstract
The proposed work was developed as part of the SmartHealth project, which aims to advance upper body rehabilitation by granting a robotic alternative to reduce the limitations of physical therapy while conferring more intensive and personalized therapy sessions for patients. The use of robots permits therapists to be relieved of laborious and repetitive tasks while supplying feedback for patients and physiotherapists through automatic recordings. The proposed strategy is to develop new python-based software that controls the robot, collects the patient's forces and muscle activity in real-time, and stores them for future analysis while providing visual feedback, thus allowing session optimization. These features permit the physiotherapist to objectively perceive the patient's performance during exercise. This solution is implemented in robots already commercialized in the industrial field. These kinds of robots are generally mass-produced in production lines at a relatively low cost and with great flexibility.

Abstract
In view of the actual climate change scenario felt across the globe, resource management is crucial, especially with regard to water. In this sense, continuous monitoring of plant water status is essential to optimise not only crop management but also water resources. Currently, monitoring of vine water status is done through expensive and time-consuming methods that do not allow continuous monitoring, which is especially inconvenient in places with difficult access. The aim of the developed work was to install three groups of sensors (Environmental, Plant and Soil) in a vineyard and connect them through LoRaWAN protocol for data transmission. The results demonstrate that the implemented system is capable of continuous data communication without data loss. The reduced cost and superior range of LoRaWAN compared to WiFi or Bluetooth is especially important for applications in remote areas where cellular networks have little coverage. Altogether, this methodology provides a remote, continuous and more effective method to monitor plant water status and is capable of supporting producers in more efficient management of their farms and water resources.

Abstract

Abstract
Simulators have been increasingly used on development and tests on several areas. They allow to speed up the development without damage and no extra costs. On realistic simulators, where kinematics play an important role, the modelling process should be imported for each component to be accurately simulated. Some robots are not yet modelled, as for example the Monera. This paper presents a model of a small vibration robot (Monera) that is acquired in a developed test-bed. A localisation ground truth is used to acquire the position of the Monera with actuating it. Linear and angular speeds acquired from real experiments allow to validate the proposed methodology.

Abstract
Currently, Unmanned Aerial Vehicles (UAVs) are considered in the development of various applications in agriculture, which has led to the expansion of the agricultural UAV market. However, Nano Aerial Vehicles (NAVs) are still underutilised in agriculture. NAVs are characterised by a maximum wing length of 15 centimetres and a weight of fewer than 50 g. Due to their physical characteristics, NAVs have the advantage of being able to approach and perform tasks with more precision than conventional UAVs, making them suitable for precision agriculture. This work aims to contribute to an open-source solution known as Nano Aerial Bee (NAB) to enable further research and development on the use of NAVs in an agricultural context. The purpose of NAB is to mimic and assist bees in the context of pollination. We designed this open-source solution by taking into account the existing state-of-the-art solution and the requirements of pollination activities. This paper presents the relevant background and work carried out in this area by analysing papers on the topic of NAVs. The development of this prototype is rather complex given the interactions between the different hardware components and the need to achieve autonomous flight capable of pollination. We adequately describe and discuss these challenges in this work. Besides the open-source NAB solution, we train three different versions of YOLO (YOLOv5, YOLOv7, and YOLOR) on an original dataset (Flower Detection Dataset) containing 206 images of a group of eight flowers and a public dataset (TensorFlow Flower Dataset), which must be annotated (TensorFlow Flower Detection Dataset). The results of the models trained on the Flower Detection Dataset are shown to be satisfactory, with YOLOv7 and YOLOR achieving the best performance, with 98% precision, 99% recall, and 98% F1 score. The performance of these models is evaluated using the TensorFlow Flower Detection Dataset to test their robustness. The three YOLO models are also trained on the TensorFlow Flower Detection Dataset to better understand the results. In this case, YOLOR is shown to obtain the most promising results, with 84% precision, 80% recall, and 82% F1 score. The results obtained using the Flower Detection Dataset are used for NAB guidance for the detection of the relative position in an image, which defines the NAB execute command.