Abstract

Abstract

Abstract

Abstract
In this Letter, a hybrid interferometer for simultaneous measurement of the partial pressures of O-2 and CO2 mixtures is reported. The sensing head consists in the combination of two interferometric structures, one a Fabry-Perrot cavity and the other a modal interferometer. The intrinsic Fabry-Perot was formed by splicing a single mode fiber with a graded index fiber length that was then subjected to chemical etching creating an air cavity. The second interferometer is based on a splice of a pure silica tube in series with the Fabry-Perot. It was observed for a particular gas that its refractive index changes with pressure variation in a specific way, a characteristic that permitted the simultaneous measurement of partial pressures of CO2 and O-2 with rms deviations of similar to +/- 48.7 kPa and similar to +/- 20.1 kPa, respectively. (C) 2012 Optical Society of America

Abstract
We propose and theoretically study a novel surface-plasmon-resonance sensor based on an H-shaped, elliptical-core optical fibre. The two grooves of the H-fibre are coated with a thin, uniform metal layer that in turn is covered with a high-index dielectric layer to allow broad spectral tunability. The sensor maintains linear polarization and facilitates effortless splicing. Electromagnetic mode analysis indicates a sensitivity of 1800 nm/RIU (refractive-index unit) for aqueous analytes.

Abstract
A concept of long-period-based optical fiber sensors, with broadband light illumination generated just after the sensing structure, is presented in this work. This new approach allows the interrogation in transmission of the sensing head while integrated in a reflective configuration, which means the long-period grating (LPG) sensor is seen in transmission by the optical source but in reflection by the measurement system. Also, it is shown that with this illumination layout the optical power balance is more favorable when compared with the standard configurations, allowing better sensor performances, particularly when the sensing head is located far away from the photodetection and processing unit. This is demonstrated for the case of the LPG structure applied to measure strain and using ratiometric interrogation based on the readout of the optical power reflected by two fiber Bragg gratings spectrally located in each side of the LPG resonance.