Abstract
It is presented an optical fiber sensing system projected to operate in the demanding conditions associated with coal waste piles in combustion. Distributed temperature measurement and spot gas sensing are requirements for such a system. A field prototype has been installed and is continuously gathering data, which will input a geological model of the coal waste piles in combustion aiming to understand their dynamics and evolution. Results are presented on distributed temperature and ammonia measurement, being noticed any significant methane emission in the short time period considered. Carbon dioxide is also a targeted gas for measurement, with validated results available soon. The assessment of this technology as an effective and reliable tool to address the problem of monitoring coal waste piles in combustion opens the possibility of its widespread application in view of the worldwide presence of coal related fires.

Abstract
In this work, it is demonstrated a fiber ring resonator connected to an interrogation system usually implemented on a cavity ring-down technique. A long-period grating (LPG) was inserted in the resonant cavity, being operated as a curvature sensor. The experimental results demonstrate that using this setup, different sensitivities can be achieved in terms of analyzing decay time over the radius of the curvature and over curvature. The LPG sensor presented higher sensitivity with larger radius of curvature, namely 6.91 s/m. (c) 2016 Wiley Periodicals, Inc. Microwave Opt Technol Lett 58:267-270, 2016

Abstract
This letter presents a fiber-optic cavity ring down (CRD) configuration using an added-signal for curvature sensing. An optical time-domain reflectometer was used to send impulses down into the fiber loop cavity, inside of which a long period grating was placed to act as a sensing device. The added-signal was obtained by the sum of several conventional CRD impulses, thus providing an improvement on the curvature sensitivity when compared with the conventional CRD signal processing. A linear response to applied curvature in the range of 2.2-3.6 m(-1) was observed, and a sensitivity of 15.3 mu s/m(-1) was obtained. This result was found to be 20-fold the one obtained for the conventional CRD signal processing. The added-signal increases the optical power but increases as well the ring-down time due to the sum of the several loops that light travels inside the ring. A ring-down time response of 43.3 mu s was attained (versus 23.7 mu s for the conventional CRD signal processing).

Abstract
This work presents a demonstration of the potential of fiber cavity ring-down for remote sensing, by using an OTDR to send impulses down similar to 20 km of optical fiber at the end of which the fiber ring cavity was placed. The OTDR showed almost no losses in the fiber, so other ring-down cavities could be spliced along the same fiber. To study the sensitivity of the cavity ring an intensity sensor based on a taper was placed in the ring and glued to a translation stage. A displacement of the stage imposes a curvature on the taper and an associated loss. The configuration had a sensitivity of (11.8 +/- 0.5) mu s/mm.

Abstract
A multimodal interferometer based on a new microstructured fiber tip is proposed for detection of the evaporation process of acetone. The new geometry consists of a capillary tube in which an offset Ge-doped core is fused and spliced at the end of a single-mode fiber. The fiber tip sensor structure was immersed in liquid acetone and the evaporation process of acetone was monitored in real time. Due to the refractive index variation of the external medium with increasing temperature, a short detection time of similar to 1 s was achieved. (C) 2014 Society of Photo-Optical Instrumentation Engineers (SPIE)

Abstract
This work presents a fiber CRD configuration for the measurement of strain. An Optical Time-Domain Reflectometer was used to send impulses down into the fiber loop cavity, inside of which a chirped fiber Bragg grating was placed to act as a strain sensing element. This technique could provide strain results with both conventional CRD-based configuration and the OTDR.