Abstract
Low Power Wide Area Networks (LPWAN) enable a growing number of Internet-of-Things (IoT) applications with large geographical coverage, low bit-rate, and long lifetime requirements. LoRa (Long Range) is a well-known LPWAN technology that uses a proprietary Chirp Spread Spectrum (CSS) physical layer, while the upper layers are defined by an open standard - LoRaWAN. In this paper, we propose a simple yet effective method to improve the Quality-of-Service (QoS) of LoRa networks by fine-tuning specific radio parameters. Through a Mixed Integer Linear Programming (MILP) problem formulation, we find optimal settings for the Spreading Factor (SF) and Carrier Frequency (CF) radio parameters, considering the network traffic specifications as a whole, to improve the Data Extraction Rate (DER) and to reduce the packet collision rate and the energy consumption in LoRa networks. The effectiveness of the optimization procedure is demonstrated by simulations, using LoRaSim for different network scales. In relation to the traditional LoRa radio parameter assignment policies, our solution leads to an average increase of 6% in DER, and a number of collisions 13 times smaller. In comparison to networks with dynamic radio parameter assignment policies, there is an increase of 5%, 2.8%, and 2% of DER, and a number of collisions 11, 7.8 and 2.5 times smaller than equal-distribution, Tiurlikova's (SoTa), and random distribution, respectively. Regarding the network energy consumption metric, the proposed optimization obtained an average consumption similar to Tiurlikova's, and 2.8 times lower than the equal-distribution and random dynamic allocation policies. Furthermore, we approach the practical aspects of how to implement and integrate the optimization mechanism proposed in LoRa, guaranteeing backward compatibility with the standard protocol.

Abstract
Low Power Wide Area Networks (LPWAN) enable a growing number of Internet-of-Things (IoT) applications with large geographical coverage, low bit-rate and long lifetime requirements. LoRa (Long Range) is a well-known LPWAN technology which uses a proprietary Chirp Spread Spectrum (CSS) physical layer, while the upper layers are defined by an open standard - LoRaWAN. In this paper, we propose a simple yet effective method to improve the Quality-of-Service (QoS) of LoRa networks by fine-tuning specific radio parameters. Through a Mixed Integer Linear Programming (MILP) problem formulation, we find optimal settings for the Spreading Factor (SF) and Carrier Frequency (CF) radio parameters, considering the network traffic specifications as a whole, to improve the Data Extraction Rate (DER) and to reduce the packet collision rate and the energy consumption in LoRa networks. The effectiveness of the optimization procedure is demonstrated by simulations, considering realistic scenarios. In relation to the traditional LoRa radio parameter assignment policies, our solution leads to an average increase of 30% in DER, and a number of collisions 17 times smaller. In comparison to networks with dynamic radio parameter assignment policies, there is an increase of 10.5% and 4% of DER, and a number of collisions 13.5 and 7.5 times smaller than equal-distribution and random distribution, respectively. Regarding the network energy consumption metric, the proposed optimization obtained an average consumption 3.6 and 2.74 times lower than the equal-distribution and random dynamic allocation policies, respectively. Furthermore, we approach the practical aspects on how to implement and integrate the optimization mechanism proposed in LoRa, guaranteeing backward compatibility with the standard protocol.

Abstract
Conventional wireless communication systems are typically designed assuming a single transmitter-receiver pair for each link. In Low-Power Wide-Area Networks (LP-WANs), this one-to-one design paradigm is often overly pessimistic in terms of link budget because client packets are frequently detected by multiple gateways (i.e. one-to-many). Prior work has shown massive improvement in performance when specialized hardware is used to coherently combine signals at the physical layer. In this paper, we explore the potential of using multiple receivers at the MAC and link layer where these performance gains are often neglected. We present an approach called Opportunistic Packet Recovery (OPR) that targets the most likely corrupt bits across a set of packets that suffered failed CRCs at multiple LoRa LP-WAN base-stations. We see that bit errors are often disjoint across receivers, which aids in collaborative error detection. OPR leverages this to provide increasing gain in error recovery as a function of the number of receiving gateways. Since LP-WAN networks can easily offload packet processing to the cloud, there is ample compute time per packet (order of seconds) to search for bit permutations that would restore packet integrity. Link layer corrections have the advantage of being immediately applicable to the millions of already deployed LP-WAN systems without additional hardware or expensive RF front-ends. We experimentally demonstrate that OPR can correct up to 72% of packets that would normally have failed, when they are captured by multiple gateways.

Abstract
The Internet of Things (IoT) is rapidly becoming an integral component of the industrial market in areas such as automation and analytics, giving rise to what is termed as the Industrial IoT (IIoT). The IIoT promises innovative business models in various industrial domains by providing ubiquitous connectivity, efficient data analytics tools, and better decision support systems for a better market competitiveness. However, IIoT deployments are vulnerable to a variety of security threats at various levels of the connectivity and communications infrastructure. The complex nature of the IIoT infrastructure means that availability, confidentiality and integrity are difficult to guarantee, leading to a potential distrust in the network operations and concerns of loss of critical infrastructure, compromised safety of network end-users and privacy breaches on sensitive information. This work attempts to look at the requirements currently specified for a secure IIoT ecosystem in industry standards, such as Industrial Internet Consortium (IIC) and OpenFog Consortium, and to what extent current IIoT connectivity protocols and platforms hold up to the standards with regard to security and privacy. The paper also discusses possible future research directions to enhance the security, privacy and safety of the IIoT.

Abstract
Due to its availability and low cost, the use of wireless communication technologies increases in domains beyond the originally intended usage areas, e.g. M2M communication in industrial applications. Such industrial applications often have specific security requirements. Hence, it is important to understand the characteristics of such applications and evaluate the vulnerabilities bearing the highest risk in this context. We present a comprehensive overview of security issues and features in existing WLAN, NFC and ZigBee standards, investigating the usage characteristics of these standards in industrial environments. We apply standard risk assessment methods to identify vulnerabilities with the highest risk across multiple technologies. We present a threat catalogue, conclude in which direction new mitigation methods should progress and how security analysis methods should be extended to meet requirements in the M2M domain.

Abstract
Support for multiple concurrent applications is an important enabler for promoting the use of sensor networks as an infrastructure technology, where multiple users can deploy their applications independently. In such a scenario, different applications on a node may transmit packets at distinct periods, causing the node to change from sleep to active state more often, which negatively impacts the energy consumption of the whole network. In this paper, we propose to batch the transmissions together by defining a harmonizing period to align the transmissions from multiple applications at periodic boundaries. This harmonizing period is then leveraged to design a protocol that coordinates the transmissions across nodes and provides real-time guarantees in a multi-hop network. This protocol, which we call Network-Harmonized Scheduling (NHS), takes advantage of the periodicity introduced to assign offsets to nodes at different hop-levels such that collisions are always avoided, and deterministic behavior is enforced. NHS is a light-weight and distributed protocol that does not require any global state-keeping mechanism. We implemented NHS on the Contiki operating system and show how it can achieve a duty-cycle comparable to an ideal TDMA approach.