2013
Autores
Barbosa, RS; Silva, MF; Osório, DJ;
Publicação
Intelligent Systems, Control and Automation: Science and Engineering
Abstract
This paper presents the development of a behavior-based AGV using fuzzy logic. A robot platform and a fuzzy logic controller (FLC) are developed for the embodiment of different behaviors. Experimental results are given to assess the performance of the AGV and to validate the proposed design schemes for its construction and control. © 2013, Springer Science+Business Media Dordrecht.
2013
Autores
Silva, MF; Barbosa, RS; Castro, TS;
Publicação
NATURE INSPIRED MOBILE ROBOTICS
Abstract
The presented work allowed the creation of a quadruped robot model (with flexible body, its legs and its hip and knee joints) in the virtual simulation program Simmechanics (TM). The final objective is to use this simulation model to optimize quadruped robot locomotion. The model developed accepts different gaits by direct introduction of the angular positions of the knee and hip joints. Feet-ground interaction was also modelled using a theoretic model described in the literature.
2013
Autores
Silva, MF;
Publicação
2013 1ST INTERNATIONAL CONFERENCE OF THE PORTUGUESE SOCIETY FOR ENGINEERING EDUCATION (CISPEE)
Abstract
In recent years there has been an increasing introduction of industrial robots in the manufacturing industry, with several studies that predict the increased dissemination of robots in industrial and service sectors. On the other hand, there is often the lack of people able to plan the introduction of these equipments in manufacturing environments and to operate it after its inception. This leads to the need to train undergraduates in the operation and programming of industrial robots. Due to the Portuguese economic situation, there is a lack of funding for the higher schools, leading to the need of finding innovative ways to teach these subjects. Bearing in mind these ideas, in this paper is described a course on industrial robotics, which is based in the achievement of the practical training using commercial off-theshelf robot simulation software for off-line programming.
2013
Autores
Silva, MF; Barbosa, RS; Castro, TS;
Publicação
Nature-Inspired Mobile Robotics
Abstract
The presented work allowed the creation of a quadruped robot model (with flexible body, its legs and its hip and knee joints) in the virtual simulation program SimmechanicsTM. The final objective is to use this simulation model to optimize quadruped robot locomotion. The model developed accepts different gaits by direct introduction of the angular positions of the knee and hip joints. Feet-ground interaction was also modelled using a theoretic model described in the literature.
2013
Autores
Rynkevic, R; Silva, MF; Marques, MA;
Publicação
2013 IEEE 3RD PORTUGUESE MEETING IN BIOENGINEERING (ENBENG)
Abstract
One line of research and development in robotics receiving increasing attention in recent years is the development of biologically inspired walking robots. The purpose is to gain knowledge of biological beings and apply that knowledge to implement the same methods of locomotion ( or at least use the biological inspiration) on the machines we build. It is believed that this way it is possible to develop machines with capabilities similar to those of biological beings in terms of locomotion skills and energy efficiency. One way to better understand the functioning of these systems, without the need to develop prototypes with long and costly development, is to use simulation models. Based on these ideas, this work concerns the biomechanical study of the spider crab, using the SimMechanics toolbox of Matlab/Simulink. This paper describes the anatomy and locomotion of the spider crab, its modeling and control and the locomotion simulation of a crab within the SimMechanics environment.
2013
Autores
Silva, M; Barbosa, R; Castro, T;
Publicação
2013 8TH EUROSIM CONGRESS ON MODELLING AND SIMULATION (EUROSIM)
Abstract
Legged robots are being the target of several studies and research. The idea is to develop machines that present characteristics approximate to the ones observed in biological living creatures. However this objective is still relatively far away and the development of prototypes for these studies is expensive and time consuming, which leads to the creation of models that allow the realization of the intended studies in software. These models should include the main characteristics of biological creatures relevant for locomotion studies. Given this, the presented work describes the development of a quadruped robot model in MATLAB/Simmechanics (TM). This model is intended to be used in the development of gaits for legged robots based on Central Pattern Generators. With this purpose in mind, the model was developed in a way to accept different gaits by direct introduction of the angular positions of the knee and hip joints. Various parameters of the robot are also easily changed through a configuration file that accompanies the model. This paper presents the model of a robot with flexible body, its legs and its hip and knee joints. The model of a feet-ground interaction was also modelled using a theoretic model described in the literature.
The access to the final selection minute is only available to applicants.
Please check the confirmation e-mail of your application to obtain the access code.