2008
Autores
Braga, RAM; Petry, M; Oliveira, E; Reis, LP;
Publicação
ICINCO 2008: PROCEEDINGS OF THE FIFTH INTERNATIONAL CONFERENCE ON INFORMATICS IN CONTROL, AUTOMATION AND ROBOTICS, VOL RA-2: ROBOTICS AND AUTOMATION, VOL 2
Abstract
The development of intelligent wheelchairs is a very good solution to assist severely handicapped people who are unable to operate classical electrical wheelchair by themselves in their daily activities. This paper describes the integration of a robotic simulator with our intelligent wheelchair shared control and planning modules. An adapted version of the free Cyber-Mouse robotic simulator was used to simulate the movement of the intelligent wheelchair in a hospital environment. Adaptations of the subsumption architecture, Strips Planning and A* Algorithms were employed and integrated to allow wheelchair intelligent behavior. The experimental results have demonstrated the success of the integration of these algorithms in our simulator allowing very safe motion of the intelligent wheelchair in the simulated hospital environment. Also, the adapted Cyber-Mouse simulator proved its capability and robustness in simulating the hospital environment and wheelchair physic characteristics.
2008
Autores
SILVA, MF; MACHADO, JAT;
Publicação
Advances in Mobile Robotics
Abstract
2008
Autores
Silva, MF; Machado, JAT;
Publicação
ROBOTICA
Abstract
This paper studies the mechanical configuration and the periodic gaits of multi-legged locomotion systems based on its kinematic and dynamic models. The purpose is to determine the system performance during walking, and the best set of locomotion variables that minimize a set of optimization indices. In this perspective, two kinematic and four dynamic indices are formulated to quantitatively measure the performance of the walking robot. The kinematic indices consist of the perturbation analysis and the locomobility measure, and the dynamic performance indices of the walking robot locomotion are the mean absolute density of energy, the mean power density dispersion, the density of power lost and the mean force at the body-legs interface. A set of model-based simulation experiments reveals the system configuration and the type of movements that lead to a better performance, for a specific locomotion mode, from the viewpoint of the proposed indices.
2008
Autores
Silva, MF; Machado, JAT; Jesus, IS;
Publicação
Proceedings of the IASTED International Conference on Modelling, Identification, and Control, MIC
Abstract
Biological inspired robotics is an area experiencing an increasing research and development. In spite of all the recent engineering advances, robots still lack capabilities with respect to agility, adaptability, intelligent sensing, fault-tolerance, stealth, and utilization of in-situ resources for power when compared to biological organisms. The general premise of bio-inspired engineering is to distill the principles incorporated in successful, nature-tested mechanisms of selected features and functional behaviors that can be captured through biomechatronic designs and minimalist operation principles from nature success strategies. Based on these concepts, robotics researchers are interested in gaining an understanding of the sensory aspects that would be required to mimic nature design with engineering solutions. In this paper are analysed developments in this area and the research aspects that have to be further studied are discussed.
2008
Autores
Barbosa, RS; Machado, JAT; Silva, MF;
Publicação
JOURNAL OF VIBRATION AND CONTROL
Abstract
In this article we describe several methods for the discretization of the differintegral operator s(a), where alpha = u + jv is a complex value. The concept of the conjugated-order differintegral is also introduced, which enables the use of complex-order differintegrals while still producing real-valued time responses and transfer functions. The performance of the resulting approximations is analysed in both the time and frequency domains. Several results are presented that demonstrate its utility in control system design.
2008
Autores
Silva, MF; Tenreiro Machado, JA; Tar, JK;
Publicação
ICCC 2008 - IEEE 6th International Conference on Computational Cybernetics, Proceedings
Abstract
Climbing robots are being developed for applications ranging from cleaning to inspection of difficult to reach constructions. These machines should be capable of travelling on different types of surfaces (such as floors, walls, ceilings) and to walk between such surfaces. Furthermore, these machines should adapt and reconfigure for various environment conditions and should be self-contained. Regarding the adhesion to the surface, they should be able to produce a secure gripping force using a light-weight mechanism. Bearing these facts in mind, this paper presents a survey of different technologies used for climbing robots adhesion to surfaces. © 2008 IEEE.
The access to the final selection minute is only available to applicants.
Please check the confirmation e-mail of your application to obtain the access code.