Abstract
A review in fiber post-processing for sensing applications is presented. The review is divided in three parts. Tapers devices, chemical etching for Fabry-Perot cavities and focused ion beam (FIB) as post-processing applied in optical fibers are considered. The most recent results as sensing elements are shown. © 2014 OSA.

Abstract
This paper presents the TEC4SEA research infrastructure created in Portugal to support research, development, and validation of marine technologies. It is a multidisciplinary open platform, capable of supporting research, development, and test of marine robotics, telecommunications, and sensing technologies for monitoring and operating in the ocean environment. Due to the installed research facilities and its privileged geographic location, it allows fast access to deep sea, and can support multidisciplinary research, enabling full validation and evaluation of technological solutions designed for the ocean environment. It is a vertically integrated infrastructure, in the sense that it possesses a set of skills and resources which range from pure conceptual research to field deployment missions, with strong industrial and logistic capacities in the middle tier of prototype production. TEC4SEA is open to the entire scientific and enterprise community, with a free access policy for researchers affiliated with the research units that ensure its maintenance and sustainability. The paper describes the infrastructure in detail, and discusses associated research programs, providing a strategic vision for deep sea research initiatives, within the context of both the Portuguese National Ocean Strategy and European Strategy frameworks.

Abstract
A new, fiber-based, cavity ring-down topology is presented which enables the application of the cavity ring-down technique to remote sensing, by the use of a large cavity ring and an optical circulator. For a proof of concept a 1.5 km ring is assembled and a taper is used as a sensing head for measuring displacement. The cavity ring-down technique is seen to hold some potential for remote sensing through its implementation on optical fibers.

Abstract
Pressure fiber sensors play an important role in downhole high pressure measurements to withstand long term operation. The purpose of this paper is to present an application of hollow core photonic crystal fiber (HC-PCF) as a high pressure sensor head for downhole application based on dispersion variation. We used a high pressure stainless steel unit to exert pressure on the sensor. The experimental results show that different wavelengths based on sagnac loop interferometer have additive sensitivities from 5 x 10(-5) nm/psi at 1480 nm to 1.3 x 10(-3) nm/psi at 1680 nm. We developed a simulation to understand the reason for difference in sensitivity of wavelengths and also the relationship between deformation of HC-PCF and dispersion variation under pressure. For this purpose, by using the finite element method, we investigated the effect of structural variation of HC-PCF on spectral transformation of two linear polarizations under 1000 psi pressure. The simulation and experimental results show exponential decay behavior of dispersion variation from -3.4 x 10(-6) 1/psi to -1.3 x 10(- 6) 1/psi and from -5 x 10(-6) 1/psi to -1.8 x 10(-6) 1/psi, respectively, which were in a good accordance with each other. (C) 2014 AIP Publishing LLC.

Abstract
In this work we present a new low cost SPR (Surface Plasmon Resonance) sensor configuration based on efficient higher-order mode filtering in plastic multimode fibers, using a tapered POF (Plastic Optical Fiber) after the sensor system, without decreasing the sensitivity of the sensor. In particular, we present the experimental results obtained with this new configuration. The experimental results have shown as the tapered POF after the sensor system influences the performances in terms of refractive index range and Signal-to-Noise Ratio (SNR).

Abstract
This paper investigates numerically the performance of a design for an optical sensor of the refractive index of gases and liquids based on smart or functional metamaterial films (smart optical metamembranes).