Abstract
Previous literature shows that there are different environmental factors with different impacts on the adoption of technologies in a supply chain context. Thus, the adoption of technologies in supply chains may vary according to different environmental factors. Despite the existence of several studies about adoption of technologies in supply chain contexts that include environmental factors, there is a gap in identifying which environmental factors influence the adoption of digitalization technologies in supply chains. The purpose of this study is therefore to identify and analyze the environmental factors that influence the adoption of digitalization technologies in the supply chain. An exploratory qualitative research was conducted using semi-structured interviews with Portuguese managers of companies at several tiers of the automotive supply chain. Environmental factors were pointed as particularly critical drivers to promote the adoption of digitalization technologies in the automotive supply chain. Such adoption is mainly driven by the Original Equipment Manufacturer ( OEM), through coercive and normative pressures over the other tiers of the supply chain. Relevant factors identified are: compliance with standards and legislation, market and industry pressures, and benchmark the evolution of supply chain partners. This study contributes to the literature with new knowledge concerning new specificities of the environmental factors that showed an important influence on the adoption decision.

Abstract
The consumer's profile and behaviour have undergone drastic changes in recent years, as a result of rapid technological developments associated with the proliferation of the Internet, which have boosted the growth of e-commerce. Retail needed to adopt new strategies to respond to new consumer demands leading to the development of omnichannel. The omnichannel strategy is centred on the consumer and aims to offer him/her a unique, consistent, and quality experience, through any contact point and wherever the consumer wants. However, most Portuguese retailers still opt for a multichannel strategy, where the physical shop and the online shop operate independently from each other. Although there are already some successful cases in Portugal, it can be considered that the use of omnichannel is still at an early stage. More publicity is needed so that retailers are aware of the concept and above all recognise the advantages of this new strategy. Before disclosure it is important to understand why companies work with both online and offline channels and do not opt for an omnichannel strategy. This study aims to analyse Portuguese companies that have not yet adopted an omnichannel strategy, to understand the barriers that make them unwilling to adopt this strategy. To this end, a quantitative research was carried out through the application of surveys to companies in different districts of Portugal to understand their position in relation to omnichannel and the reasons for not moving to this structure. The results obtained made it possible to describe the importance of omnichannel as a commercial and distribution strategy and analyse the reasons why its use by companies in Portugal is still extremely low. The lack of knowledge about the structure and management issues emerged as the biggest barriers.

Abstract
An unprecedented outbreak pandemic caused disruption around the world. It had a strong impact on economic sector. Although, the pandemic accelerated the growth of e-commerce for specific categories as food retailer. As a result, several companies restructured their structures, in terms of IT and operations. During the first confinement, the operations and the website of SONAE MC were not prepared for the increase that existed due to the pandemic, COVID-19, causing disruption in the supply chain and long lead times. In this paper, it is explained how SONAE MC reduced its dependence on refrigerated vehicles, simplifying operations and reducing the costs of transporting products from online orders in vehicles with cargo space able to transport positive cold food and negative cold. It is also explained how innovation has ensured that products continue to be transported with quality and safety to all customers of the SONAE MC Darkstore. The result was the implementation of the proposed solution which may grow technologically once information and equipment are available.

Abstract
With the increasing use of air transport (cargo and passengers), the evolution of safety standards to an increasingly demanding level, markets have seen the development of business structures and strategies in the sector. Since 2009, revenues in the sector have been increasing, but it is necessary to optimize the operations that compose it. One of the critical areas is the management of maintenance schedules and consequently the stock management. In addition, the increase in e-commerce has led to cargoes having increasingly diverse specificity, value, and levels of urgency of delivery. The requirement for reliable and timely service is considered to be the main requirement and is matched by the price requirement. The high cost of stopping a plane outweighs the cost of transporting the required part, overriding the requirements of time and reliability, particularly in Aircraft on Ground (AOG) shipments. It has found that one of the problems is the small size of a large percentage of the components being transported. This feature encourages losses during transport and is blamed on various intermediaries in the supply chain. The need to track and trace product in real time is therefore crucial, particularly with the current demands of e-commerce customers. In this sense, the opportunity arose to the development of a package for the transport of small items allowing their traceability and monitoring. Through a questionnaire addressed to elements that intervene directly in the management of AOG shipments, 100% of respondents affirm that the use of an easy-to-identify box would avoid delays or losses and 91.7% of respondents affirm that a GPS device would improve the level of service.

Abstract
Background: E-commerce has emerged as a good response to the pandemic of COVID-19. However, the costs of providing a service, which includes a driver and a vehicle, in a regular vehicle that can transport goods that need positive cold (0 & DEG; to 5 & DEG;C) are very high. Objectives: This paper aims to investigate how a big Portuguese retailer company can reduce its dependence on refrigerated vehicles, simplifying operations and reducing the costs of transporting positive and negative cold food. Methods/Approach: This research was carried out in a food retailer Portuguese company, more precisely in a Dark Store dedicated to the online channel. The study was developed based on the AS-IS/TO-BE process analysis methodology, starting with the analysis of the current situation, giving rise to the so-called AS-IS model. Results: It was possible to reduce costs associated with transporting positive cold goods. As a result, there are 30% fewer costs associated with order transportation. With an additional 10% in space optimization with the gain of space within the galley of each vehicle. Conclusions: The costs of transporting positive and negative cold foods were decreased, and substituting vehicles with room temperature transport reduced the need for refrigerated vehicles.

Abstract
Companies focus on achieving high service levels and need to combine short service times with the dynamics between cost and quality. Their transportation systems are therefore a fundamental part; they must be reliable and efficient. This study was implemented in a company of the marine industry, and its final product has special characteristics that require special transportation, i.e., they need a truck with a special structure to be able to transport the boats. This situation causes the vehicle to return empty to the company, a route that the company must support economically. The company has already approached several options with logistic service providers (3PL) without obtaining positive solutions. It is in this sense that the present project arises, which aims to develop a tool for the creation of round-trip circuits, given that in the current context the company intends to acquire a vehicle with reduced environmental impact. In a first phase we analyze the company’s needs based on the unique characteristics of the final product, then we study the existing options on the market. Culminating in the proposal of a vehicle that allows performing a circuit in round trip (distribute the final product and return with raw material and not empty) powered by renewable energy. © 2023, The Author(s), under exclusive license to Springer Nature Switzerland AG.